![J&W JW-X48D2 EXTREME Скачать руководство пользователя страница 11](http://html1.mh-extra.com/html/jandw/jw-x48d2-extreme/jw-x48d2-extreme_user-manual_625678011.webp)
- 10 -
Intel X48 Series User's Manual
2.5 Connecting Peripheral Devices
2.5.1 Floppy and IDE Disk Drive Connectors
The FDD connector connects up to two floppy drives with a 34-wire, 2-connector floppy
cable.Connect the single end at the longer length of ribbon cable to the FDD on the board,
the two connectors on the other end to the floppy disk drives connector. Generally you need
only one floppy disk drive in your system.
2.5.2 Serial ATA Connectors
Each SATA connector serves as one single channel to connect one SATA device by SATA
cable.
2.5.3 PCI and PCI Express slots
Install PCI Express X1 graphics card into slot “PCIE1” or "PCIE3" or "PCIE4".
Install PCI Express X16 graphics card into slot “PCIE2” or "PCIE5".
Install PCI card into slots “PCI1” or “PCI2” .
Each of the IDE port connects up to two IDE
drives at Ultra ATA 133/100
/66/33
mode by
one 40-pin, 80-conductor,and 3-connector Ultra
ATA/66 ribbon cables.
Connect the single end (blue connector) at the
longer length of ribbon cable to the IDE port of
this board, the other two ends (gray and black
connector) at the shorter length of the ribbon
cable to the connectors of your hard drives.
Make sure to configure the “Master” and “Slave” relation
before connecting two drives by one single ribbon cable.
The red line on the ribbon cable must be aligned with
pin-1 on both the IDE port and the hard-drive connector.
The red line on the ribbon cable must be aligned with pin-1 on both the FDD port and the floppy connector.
PWR_BT
RST_BT
LED1
PCIE5
JLAN
JLAN1
JBIO
SL
C
SATA1
USB
SATA2
SATA3
PS/2 Keyboard
USB
CMOS_BT
SPDIF_IN
1394
DUAL
eSATA
SPDIF_OUT
LAN
USB
LAN
USB
AUDIO_1
SAFE_BIOS
USER_BIO
S
SF
AN3
SF
AN5
SF
AN4
JUSB
J1394
1
3
1
3
1
1
3
3
3
1
PWR_BT
RST_BT
LED1
PCIE5
JLAN
JLAN1
JBIO
SL
C
SATA1
USB
SATA2
SATA3
PS/2 Keyboard
USB
CMOS_BT
SPDIF_IN
1394
DUAL
eSATA
SPDIF_OUT
LAN
USB
LAN
USB
AUDIO_1
S
AFE_BIOS
USER_BIO
S
SF
AN3
SF
AN5
SF
AN4
JUSB
J1394
1
3
1
3
1
1
3
3
3
1
This eSATA connector port,
there is necessary to install
RAID driver if you want to use it
under system.