Jands WMX, Руководство по эксплуатации

Страница: 2 / 28

Contents ii
WMX SERIES DIMMER OPERATING MANUAL
EMC COMPLIANCE
N108
This product is approved for use in Australia/New Zealand and conforms to the following standards:
Australian / New Zealand
Standards
AS/NZS 3439.1:2002
AS/NZS CISPR 15:2002
To ensure continued compliance with EMC Directive 89/336 and the Australian Radiocommunications
Act 1992, use only high quality data cables with continuous shield, and connectors with conductive
backshells. Examples of such cables are:
DMX: Belden 8102 100% Aluminium foil screen, 65% Copper braid.
DISCLAIMER
Information contained in this manual is subject to change without notice and does not
represent a commitment on the part of the vendor. JANDS PTY LTD shall not be
liable for any loss or damage whatsoever arising from the use of information or any
error contained in this manual.
It is recommended that all service and repairs on this product be carried out by
JANDS PTY LTD or its authorised service agents.
JANDS PTY LTD cannot accept any liability whatsoever for any loss or damage
caused by service, maintenance or repair by unauthorised personnel, or by use other
than that intended by the manufacturer.
JANDS WMX Series dimmers must only be used for the purpose they were intended
by the manufacturer and in conjunction with this operating manual.
Disconnect mains power when not in use.
Manufactured in China
Designed in Australia
JANDS PTY LTD ACN 001 187 837
40
Kent Rd Locked Bag 15
Mascot NSW 2020 MASCOT NSW 1460
Sydney Australia Sydney Australia
Phone:
+61-2-9582-0909 Email: jandsinfo@jands.com.au
Fax: +61-2-9582-0999 Web: www.jands.com.au

JANDS PTY LTD 2007 All rights reserved
Revision 1 15 January 2007