J&M nitro gro 6018 Скачать руководство пользователя страница 11

Страница: 11 / 74

Flow monitors allow the operator to see the rate of flow to each

coulter through a floating ball inside the transparent inspection tube.

Each coulter is connected with a separate supply hose.

The standard pump for your NitroGro applicator is the Ace FMC-150-HYD-206. The maximum

hydraulic fluid input pump for this pump is 7 gallons per minute. The optional, larger pump

available for your applicator is the Ace FMC-750-HYD pump. The maximum hydraulic fluid input

pump for this pump is 18 gallons per minute.

IMPORTANT - Do not exceed 7 gallons per minute hydraulic fluid input when using the Ace

FMC-150-HYD-206 pump or 18 gallons per minute when using the Ace FMC-750-HYD pump.

The hydraulic pump is located below the tank and near the tank outlet to prevent cavitation and

provide faster pump priming.

Depending on the pump used in your applicator, set the hydraulic flow of the tractor to 7 or 18

gallons per minute before you put the hydraulic fertilizer pump into use. If you don’t turn down

the tractor hydraulic flow to the pump, damage will occur (refer to set up Instructions in the

pump manual).

IMPORTANT - Do not exceed 1,350 psi on the down pressure gauge.

It is

VERY IMPORTANT NOT TO EXCEED 1,350 psi

of pressure on the down pressure

gauge. Doing so may cause damage to the inner wing fold cylinders.

The down pressure relief valve provides adjustable hydraulic pressure to force the coulters on

the wings into the ground while allowing the wing to flex up and down as needed to follow

the contour of the ground.

•

Turn clockwise to increase down pressure.

•

Turn counter clockwise to decrease down pressure.

Flow Monitors

Down Pressure Relief Valve

Toolbar Down Pressure Gauge

Hydraulic Pump

Содержание nitro gro 6018











































































Результаты поиска

Содержание nitro gro 6018

Отзывы:

Похожие инструкции для nitro gro 6018

Бренды по названию

Популярные бренды

J&M nitro gro 6018, Руководство пользователя

Результаты поиска

Содержание nitro gro 6018

Отзывы:

Похожие инструкции для nitro gro 6018

Бренды по названию

Популярные бренды