7
8
In order to stop the cleaning process earlier than the time set,
press the OFF switch. To resume the cleaning process, press
the ON switch again. Alternatively, you can use the SET button
to select a new time interval and then press the ON switch again.
Important! You can repeat the cleaning process in order to intensify the cleaning effect. If the
cleaning process is started several times, the liquid becomes very warm (approx. 41℃ after the
first cleaning process and approx. 60℃ after the third in spite of a five-minute cooling down
phase). However, it is recommended that between the cleaning processes a pause of at least
five minutes is inserted in order to allow the device to cool down.
• If you would like to repeat the cleaning process, press the SET button.
• Use the SET button to select the desired time from the five possibilities.
• Press the ON switch and start the cleaning process.
After the cleaning process has ended, remove the mains plug
from the socket, open the cover and take the cleaned object
out of the device.
Note:
In order to avoid limescale residues, always empty the stainless
steel tank and wipe dry with a fabric or microfibre cloth.
We recommend that the liquid should be renewed after every cleaning
process if possible.
Please store the device in a cool and dry place.
CLEANING METHODS
General Cleaning:
Use normal tap water for general cleaning (the water should completely
cover the item to be cleaned, although the maximum filling height should not be exceeded).
Basic Cleaning:
Cleaning concentrates can be used to intensify the cleaning effect of the
device (e.g. commercially available washing-up liquid or SeaClean2).
Fill the stainless steel tank with a cleaning mixture consisting of five parts of water and one
part of washing-up liquid (e.g. 250ml of water, 50 ml of washing-up liquid).
Please follow the information provided by the manufacturer on the pack.
Partial Cleaning:
For the partial cleaning of large objects please use the device with the
cover/lid open.
