James Ultra 6050, Руководство пользователя

Страница: 10 / 16

8
Removing tarnish, carbon and rust
When removing tarnish, carbon & rust from your non-plated (e.g.: solid silver)
metals, it is recommended to use a specialist cleaning solution such as Metal
Gleam (see page 5 for details) when using your ultrasonic cleaner, as ultrasonic
cleaning alone may not achieve the results.
If in any doubt about your items to be cleaned, before use, contact your jeweller
or James Products for information and advice on cleaning your items.
Important notes
• Care should be taken when using different types of cleaning soaps or
detergents. Always ensure they are suitable for the item you are cleaning. If in
doubt, please ask James Products or check
www.jpl.uk.com .
• If there is any danger of scratching to an item to be cleaned, place the item
on the supplied plastic tray (to separate the item from the stainless steel tank)
before immersing in the tank. Unavoidably, the tray absorbs some of the
ultrasonic energy, which may slightly reduce the effectiveness of the cleaning
action. If the item is not at risk of damage from vibrations against the stainless
steel tank, then the tray can be omitted for a stronger clean.
• The use of SOLVENTS or ALCOHOL in the tank or on any part of the cleaner
will damage your ultrasonic cleaner and void any warranty.
MAX
1
Different ways of cleaning
To avoid causing permanent damage: Never operate the unit without
water in the cleaning tank. Never use boiling water.
General cleaning
Use plain warm tap water (ideally 45 to 50
O
C) with a few
drops of washing up liquid. Ensure that the water level does
not exceed the MAX marking when immersing the item.
If the item is very dirty or has oil or grease smears (CDs,
etc.) then add 3 to 4 drops of regular washing up liquid to
enhance the cleaning result.
Enhanced cleaning
If the item is very dirty or has oil or grease smears then you
can achieve amazing results by using either our Sea Clean
or Metal Gleam concentrates (see page 5 for details).
MAX
2
3
Cleaning large items
If the item is too large to fit completely in the tank, then
you can use the ultrasonic cleaner with the item partly
immersed with the lid open. Ensure that the MAX marking
is not exceeded when immersing the item.