James TVJ LED S32 D1600, Руководство по эксплуатации

Страница: 31 / 41

11
Connections and Setup
Initial Setup
Initial setup involves selecting all the settings
required to be able to search for and store all
the analogue and digital channels you can
receive.
Make sure that the television is switched on and
Note:
If the channel search retrieved only the
analogue channels it could be caused
by poor broadcasting and therefore is
not coverd by manufacturer warranty.
Manufacturers cannot be held responsible
for lack of or poor broadcasting in some
areas.
Setup wizard opens, which guides you through
the initial setup process. (Refer to Figure 1.)
Figure 1
Step 1: Environment setup
1. Press
Ÿź
to select your language, then
press OK to enter the next step.
2. Press
Ÿź
to select your conntry, then
press OK to enter the next step.
3. Press
Ÿź
to select your location, then
press OK to enter the next step.
Step 2: Network setup
1. P r e s s
Ÿ ź
t o s e l e c t y o u r n e t w o r k
connection type(Wired or wireless), then
press
OK to enter the next step.
2. Follow the guides on the screen and press
the corresponding buttons on the remote
control to proceed.
Note:
You can also skip this step and step 3
by selecting "
I do not have a network
connection ", and connect to the internet
later. For details please refer to section
Network Connection.
Step 3: Software setup
1. If the set has connected to the network
successfully, it will search for upgrade files
automatically.
2. Follow the guides on the screen and press
the corresponding buttons on the remote
control to proceed.
Step 4: Channel installation
1. Press
Ÿź
to select Continue to install
cannels.
2. Follow the guides on the screen and press
the corresponding buttons on the remote
control to proceed.
Note:
To prevent the channel installation process
form being interrupted, wait for the message
indicating that the installation is complete.
You can also skip this step by selecting "
I
don't want to install channels ".
In this case, to search and store your
channels you may do an automatic channel
search by follwing the instructions in the next
section
Performing an automatic channel
search .
Step 5: Clock setup
If the set was not connected to the network, you
can use the numeric buttons to enter the date
and time, then select the
OK button and press
OK
When the initial setup is completed, the
Congratulations message appears. Press OK
Select
2
Next
3 4 5 6
Environment
Please select your language:
English
Português
Espanol