background image

15

CARE AND MAINTENANCE

Do not turn on the unit without water in the tank.

Even though the unit is designed with multiple protections, if it is turned on 

for over 30 seconds without water in the tank, it may damage the unit or 

severely reduce the life of the unit.
If heating over 3 minutes, it will damage the heater.

 This unit is equipped with a thermal cutoff. If the cleaning function  

 is turned on without water in the tank, the temperature will rise 

continuously. The thermal cutoff will be actuated after approximately    

15 minutes respectively to ensure safety. The unit will be disabled until it 

is repaired.

Do not run the unit for extended time or continuously.

The unit is designed with overheat protection. If the unit has been running 

for 45 minutes, it is recommended to stop the unit for about 20 minutes to 

prolong the life of the unit.

Do not keep water in the cleaning tank for a long time.

After cleaning is completed, open the drainage valve to drain the dirty 

water. Clean and wipe the tank dry.

Do not spray water over the housing.

Use a towel to wipe the tank and the housing dry.

Do not expose the unit under direct sunshine for a long time.

Keep the unit in a dry, cool and ventilated area.

1

2

3

4

5

Avoid any acetone, acid, alcohol, amonia or solvents from 

contacting the plastic housing and control panel to prevent 

corrosion. Damage to the machine in this manor will void warranty.

Содержание 9020 TOUCH





















Отзывы: