Universal IR Remote Receiver, 2 Channel
―
JAMECO PART NO.
2171604
Experience Level: Beginner | Time Required: 30-60 Minutes
This is an infrared remote receiver module that is designed to work with the majority of existing
infrared remote controls to allow the operation of your devices with these controls. It provides two
control channels with two state outputs (on/off) that can be configured in a number of ways: see
characteristics below.
Characteristics:
Operates with IR signals from 99% of existing IR remotes (TV, VCR, cable, DVD, etc.)
“Learns” remote code from the chosen remote transmitter – no programming (computer code) required
Non-volatile, reprogrammable memory
Momentary, sustained/toggle, or definite action outputs
Logic, transistor (open collector or with pull up), or relay (DPDT) outputs
5 Volt DC operation, low quiescent current
Easy Assembly – no surface mount components
Required tools and parts:
Soldering iron and solder
Small diagonal cutters
Small needle nose pliers
Sponge or scrap of packaging foam
Kit Includes:
