TYRE INFLATOR
DIAL GAUGE
This Tyre Inflator features a robust rubber outer with a durable aluminium
body and one touch operation, perfect for industrial workshops, mechanics
and garages.
FEATURES
Includes Certificate of calibration
Multi-scale gauge
Wire sheathed hose eliminates kinking
Impact absorbing bumper
Accuracy exceeds EC Standards
Tough die-cast aluminium body
Large easy to read 80mm display
SPECIFICATIONS
Operation
Inflate / deflate / measure
Supply pressure max.
200 psi
Max. inflation
174 psi
Chuck type
Clip on
Chuck style
Single straight
Scale
psi, bar
Inlet size
1/4" BSP
Hose length
500 mm
Accuracy
± 2 psi @ 25 - 75 psi
Inflation volume L/min
1200 L/min @ 200 psi
Weight
.8 kg
Advised application
Industrial, workshops
MAINTENANCE MONTHLY
Remove the ‘oil’ screw on the side of the gauge and place 2-3 drops of
‘light’ oil into the gauge mechanism.
IMPORTANT
This tyre inflator must only be connected to air line systems which have
clean dry air. Any moisture in the air line system may cause damage to
the operation of this tyre inflator and void warranty.
Air pre-filters must be used with this inflator to ensure product accuracy
and longevity.
OPERATION
TO READ PRESSURE:
Remove tyre valve cap. With clip-on air chuck lever depressed, firmly press
chuck onto tyre valve stem and release lever, ensure that no air leaks.
Check pressure gauge.
Digital
- the digital display will activate once the tyre pressure is sensed.
If no pressure is sensed the display will not turn on. Press the tyre inflator
lever to add air into the tyre, before reading the pressure.
Analogue
- the dial gauge will activate once the tyre pressure is sensed. If
no pressure is sensed ,press the tyre inflator lever to add air into the tyre,
before reading the pressure.
TO INFLATE:
With clip-on air chuck lever depressed, firmly press chuck onto tyre
valve stem and release lever, ensure that no air leaks. Fully depress the
tyre inflator lever for an appropriate period of time and release the lever.
Check pressure gauge and repeat the procedure until correct pressure level
is achieved.
TO DEFLATE:
With clip-on air chuck lever depressed, firmly press chuck onto tyre valve
stem and release lever, ensure that no air leaks. Depress the tyre inflator
lever half way (until air can be heard to be escaping) for an appropriate
period of time and release the lever. Check pressure gauge and repeat the
procedure until correct pressure level is achieved.
SAFETY
Never exceed the maximum pressure of the tyre. Check that the hose and
chuck are in good condition with no damage or cracks. Ensure safe working
environment when using compressed air. Return to authorised service agent
for repair and maintenance.
WARNING
To avoid risk of personal injury, especially to the eyes, face and skin
DO NOT direct the air stream at any person, or any part of the body.
This equipment is not intended for use by childern without adult
supervision. The manufacturer reserves the right to change product
features at any time wihtout notice.