Jamara Pitts S2B, Инструкция по эксплуатации

Страница: 5 / 16

5
Building the Model
11. Glue a 6 mm stringer to the lower left and right of the
fuselage sides and add the front former ensuring that it is
square and at right angles. 2 mm balsa should then be used
to plank the lower front fuselage.
12. Dampen 1.5 mm balsa sheet and plank the fuselage top at
the front and rear.
13. Glue the pins to the battery hatch.
15. Completed upper wing half ready to be glued to the other
half.
14. Select all of the upper wing components and print out the
plan. Please note that the main spars are laser cut parts which
are not shown above. The longer main spar is for the upper
wing.
16. Glue both wing halves together and fit the central leading
edge. Plank the upper and lower joint with the precut pieces
and then fit the rear bridging piece.