JAMAR Technologies TRAX Totalizer, Руководство пользователя

Страница: 16 / 32

TRAX Totalizer User’s Manual
2-6 2-7
L3 - Two Channels with Lane Separation
A to B, B to A
In this layout, both tubes (A and B) are extended completely across
the road. Channel A and channel B record independent of each other.
When one tube is hit, the next hit is ignored.
The tubes should be
spaced four and a half inches apart and be of equal length.
EXAMPLE: A car is traveling southbound, approaching the tubes. As
the front and rear axles strike the A tube, a one is registered in the A
channel. The front and rear axles then strike the B tube but these hits
are ignored since the A tube has just been hit first. Conversely, a car
traveling northbound will strike the B tube first (recording it in the B
channel) and then have its hits on the A tube ignored.
LSense
*Note that this option is only available for loop counters.
To access the Lsense menu on a loop counter, when in the Setup menu
press the TAB key until Lsense is flashing then press the DO key.
The Lsense menu is used to select the sensitivity of the loop. Three (3)
is the default setting. A setting of one (1) is for lowest sensitivity while
a setting of five (5) is for highest sensitivity.
1 2 3 4 5
A
B
North