RCA
to
RCA
cable (available separately)
1. 45 rpm adaptor
2. Turntable
3. Spindle
4. Earplug jack
5. Bluetooth pair button
6. - vol + knob
7. Stylus
8. Tone arm
9. 33/45/78 rpm speed
selector
10. Arm lock
11. Tone arm lift lever
12. RCA output sockets
13. Aux-in socket
14. USB socket
15. Power button
16. Ac power socket
RCA
to
AUX
cable (included)
C
D
I
E
G
H
A
F
1
2
3
4
5 6
7
10
8
9
11
- VOL +
- VOL +
B
12
13
14
15
16
- VOL +
WHAT’S IN THE BOX
Turntable, platter mat, RCA to AUX cable, USB cable, AC power cord.
USING THE TURNTABLE
Plug the supplied power cord into the AC power socket on the back of
the turntable and connect to the mains.
Ensure the unit is on by pressing in the power button .
Ensure the Bluetooth device you want to connect to, is turned on and in
pairing mode. Then press the Bluetooth pair button on the turntable.
The light will flash blue when searching for the device to pair to. Once
found and paired the turntable indicator will be solid blue
.
TIP:
If taking a while to pair (+30 secs), press the Bluetooth pair button
on the turntable 1 more time to re-initiate the searching feature.
Remove the tone arm lock .
Push the lift handle to raise the tone arm
.
Select the speed - 331⁄3, 45 or 78 rpm as required .
Remove the white plastic needle guard . Keep this in a safe place,
you’ll need to put it back on when you’re finished.
Put a record on the turntable
.
Move the tone arm to the desired position on the record
.
The record will start turning as the tone arm moves across.
Pull the lift handle forward to lower the tone arm and the record will
start playing
.
When you have finished, manually remove the tone arm from the record
by using the lift handle
and return to the rest holder. The record
will stop turning at this point. Press the power button to switch off the
turntable.
NOTE:
Standby mode. The main unit will switch to standby mode when
the turntable is idle for approximately 15 minutes. Once the unit turns
into standby mode, Press POWER button to turn the unit off and then
press POWER button again to turn the unit back on.
CONNECTING TO SPEAKERS OR OTHER DEVICES
Caution:
• Switch off the power to all equipment before making connections.
• Read the instructions of each component you intend to use with this
unit.
• Be sure to insert each plug securely. To prevent hum and noise, avoid
bundling the signal interconnection cables together with the AC
power cord.
Connecting to a device with RCA input
To connect the turntable to devices with RCA input, use an RCA to RCA
cable (available separately). Connect the RCA plugs on one end of the
cable to the L and R sockets on the back of the turntable and the plugs
at the other end to the corresponding L and R sockets on the back of the
device.
Connecting to a device with AUX input
To connect the turntable to a device with an AUX input, use a RCA to AUX
cable (included). Connect the RCA plugs to the L and R sockets on the
back of the turntable and the AUX plug to the AUX socket on the back of
the device.
Headphone Operation
1. Connect a set of headphone (not included) on the Earphone socket on
the front panel of the unit.
2. Put on the headphone and slowly increase the volume until you can
hear it clearly and comfortably without distortion.
NOTE:
Never put on the headphone till you have plugged in the
headphone plug and turn down the volume level.
USING THE 45 RPM ADAPTOR
The 45 RPM adaptor allows you to play 45 RPM records:
1. Place the 45 RPM adaptor over the spindle
2. Gently place your 45 RPM record onto the turntable
3. Follow the operation instructions left to play your record.
MAINTENANCE
• DO NOT leave vinyl records on the turntable after use. Return
• the vinyl record to its original packaging and store.
• Return the tone arm to it’s original place after use and secure with tone
arm lock.
• Replace the white plastic needle guard after use. Close the turntable
cover to avoid dust damage.
• Unplug the power cable and other cables after use.
• Please note, the stylus cartridge can be easily damaged and is
NOT included in the product warranty
. For replacement stylus
cartridges, please contact Customer Service (details on back of this
leaflet).
USB TO PC RECORDING
Audacity Software
- can be downloaded from: www.audacityteam.
org/download/Full instructions for the Audacity Software USB-PC
Functions can be found at: manual.audacityteam.org
WEEE EXPLANATION
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste
disposal, recycle it responsibly to promote the sustainable reuse of
material resources.
LISTEN RESPONSIBLY
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
SPECIFICATIONS
General
Power Requirements
AC 230V~50Hz
Dimensions (W x D x H)
38 x 30 x 12cm
Weight
3.2 kgs
Record Player Section
Motor
DC servo motor
Drive System
Belt Drive
Speeds Off/331⁄3 rpm, 45 rpm, 78rpm
S/N Ratio
55 Db(AUX-IN)
RCA Out
200-280 mV (5 cm/sec at 1 KHz-10dB)
Stylu M02-M208-165
Cartridge Type
Ceramic Stereo Cartridge
Bluetooth Transmit
Bluetooth Version
Bluetooth V5.1
Bluetooth Profiles
A2DP, AVRCP
Operating Distance
7meters (22.97 ft.)
USB
Type
USB series B connector
Full-Speed
USB 2.0 full speed
