STUFF THE GOVERNMENT MAKES US SAY
LOOK MA, NO HANDS!
BLUETOOTH
®
CONNECTION, CONTINUED
Like any amazing couple, this one starts with a connection — one between your
device and the earbuds’
Bluetooth
. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the earbuds
has
Bluetooth
.
2. Turn on the earbuds (press and hold play/pause for 6 seconds) and look for the
little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for Jam Comfort Buds in your device’s
Bluetooth
list or click YES.
5. Now hit PLAY on your earbuds and crank it up — or down if you’re lame.
The device and
Bluetooth
will find each other every
time, as long as the earbuds are set to
Bluetooth
and your device’s
Bluetooth
is, you know, on.
If you’re connecting to a computer, you may have
some extra steps on that end. You’ll have to get
that information from the computer company.
Depending on your device, you may be prompted
to enter a pairing code. If prompted, enter “0000”
as the code.
Note: If you turn on your Comfort Buds but haven’t
started the party yet, they will automatically power
off after 2 minutes of unpaired inactivity.
2m
Situation
Short Press Play/Pause Button
Long Press Play/Pause Button
1
st
Incoming call
2
nd
Incoming call
On call
Pick up call
End call
Call 1 on hold, pick up call 2
Reject call
Move call from earbuds to device
Reject call 2
Both calls active
Hang up call 1, switch to call 2
Switch between call 1 and call 2
FCC Compliance:
Note: This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications not expressly approved by HMDX
could void the user's authority to operate this equipment.
IC Caution: RSS-GEN Issue 4 December 2014
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions: (1) This device
may not cause interference, and (2) This device must accept any
interference, including interference that may cause undesired
operation of the device.
1 YEAR LIMITED WARRANTY
COMING CLEAN
A soft, dry towel is all you need to
clean off your earbuds. Using water,
harsh cleaners, or anything else only
starts messing with the mechanics
inside. So, yeah, don’t do it.
For detailed warranty instructions and information visit:
USA:
www.jamaudio.com/customer-support/warranty-1yr
CAN:
canada.jamaudio.com/warranty-1yr
To obtain warranty service on your JAM product, contact a
Consumer Relations representative by telephone or email for
assistance (you can find their contact info on page 1). Please
make sure to have the model number of the product available.
When friends call to interrupt your party of one — and you know they will — answer the phone without disconnecting from your JAM
Comfort Buds. Yes, that’s right. Your earbuds have hands-free calling, too. How amazing is that? Here’s how it works:
1. Make sure your phone and earbuds are connected through
Bluetooth
.
2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Comfort Buds.
3. If you’d rather not talk, hold down the PLAY/PAUSE button on your Comfort Buds for 3 seconds to ignore the call.
THE COOLEST PART: The Comfort Buds know when a call is coming in and pause the music before ringing. When you hang up, the
music starts where it left off — and so does the party. If it’s you making the call, just start dialing from your phone, and the Comfort
Buds automatically do their hands-free thing. Isn’t it refreshing to know your earbuds totally get you?
Check out the chart below for a complete guide on handling calls with your Comfort Buds.
