BLUETOOTH
®
CONNECTION, CONTINUED
Like any amazing couple, this one starts with a connection — one
between your device and the speaker’s
Bluetooth
. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has
Bluetooth
.
2. Turn on the speaker (press and hold the power button for 3 seconds)
and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Classic 2.0 in your device’s
Bluetooth
list or click YES.
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
The device and
Bluetooth
will find each other every time, as long as the
speaker is set to
Bluetooth
and your device’s
Bluetooth
is, you know, on.
If you’re connecting to a computer, you may have some extra steps on that
end. You’ll have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If
prompted, enter “0000” as the code.
To disable pairing of existing device and pair a new device press and hold
the + and - button for 5 seconds to activate pairing mode.
Note: If you turn on your Classic 2.0 but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more,
the JAM Classic 2.0 will automatically shut off to preserve battery power.
When friends call asking to join the party — and you know they will — answer the phone without disconnecting from your JAM Classic
2.0. Yes, that’s right. Your speaker is a speakerphone, too. How amazing is that? Here’s how it works:
1. Make sure your phone and speaker are connected through
Bluetooth
.
2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Classic 2.0.
3. If you’d rather not talk, hold down the PLAY/PAUSE button on your Classic 2.0 for 3 seconds to ignore the call.
THE COOLEST PART: The Classic 2.0 knows when a call is coming in and pauses the music before ringing. When you hang up, the
music starts where it left off — and so does the party. If it’s you making the call, just start dialing from your phone, and the Classic 2.0
automatically does its hands-free thing. Isn’t it refreshing to know your speaker totally gets you?
Check out the chart below for a complete guide on handling calls with your Classic 2.0.
COMING CLEAN
A soft, dry towel is all you need to
clean off your speaker. Using water,
harsh cleaners, or anything else only
starts messing with the mechanics
inside. So, yeah, don’t do it.
HOOKING UP OLD-SCHOOL AUDIO, JACK
HELLO? SPEAKERPHONE? YES!
1. Plug one end of the cord into the speaker
and the other into the headphone jack on
your device.
2. Turn on the speaker.
3. Hit PLAY on your device and crank it up —
or down if you’re lame.
You’ll have to play and pause the music from
your device, not your speaker. No problem.
You’re there anyway, right?
2m
15m
1 YEAR LIMITED WARRANTY
For detailed warranty instructions and information visit:
USA:
www.jamaudio.com/customer-support/warranty-1yr
CAN:
http://canada.jamaudio.com/warranty-1yr
To obtain warranty service on your JAM product, contact a
Consumer Relations representative by telephone or email for
assistance (you can find their contact info on page 1). Please
make sure to have the model number of the product available.
Auxiliary cable not included.
Situation
Short Press Play/Pause Button
Long Press Play/Pause Button
1
st
Incoming call
2
nd
Incoming call
On call
Both calls active
Pick up call
End call
Call 1 on hold, pick up call 2
Hang up call 1, switch to call 2
Reject call
Move call from speaker to device
Reject call 2
Switch between 1
st
call and 2
nd
call
