HEY THERE!
JUST CHARGE IT
WE’RE HERE TO HELP. CONTACT US!
HX-P190
USER GUIDE AND
WARRANTY INFORMATION
You’ve got questions? We’ve got answers.
Contact a Consumer Relations representative by
phone or email to help answer any questions.
Please be sure to have the model number of your
product available. (Hint: It’s HX-P190)
Register your speaker! Information about where
you bought it and how you’re using it is like
gold for the people who make these speakers.
To register, visit:
USA:
www.jamaudio.com/customer-support/product-registration
CAN:
http://canada.jamaudio.com/product-registration
Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it
using your computer or a wall outlet. The Classic 2.0 needs about 2 hours for up to 5 hours of party time.
1. The cord that came with the speaker — the
one with the USB on one end and the micro
USB on the other — will work with your
computer.
2. If you want to use the wall outlet, you’ll need
to pick up a power cord with a micro USB the
next time you’re at the store, or use any USB AC
adapter, including the one for your cell phone.
SHED SOME LIGHT
BLUETOOTH
®
CONNECTION — IT’S A SETUP
Like any amazing couple, this one starts with a connection — one
between your device and the speaker’s
Bluetooth
. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has
Bluetooth
.
2. Turn on the speaker (press and hold the power button for 3 seconds)
and look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Classic 2.0 in your device’s
Bluetooth
list or click YES.
USA
[email protected]
1.888.802.0040
8:30am–7:00pm EST M–F
[email protected]
1.888.225.7378
8:30am–5:00pm EST M–F
CANADA
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
The device and
Bluetooth
will find each other every time, as long as the
speaker is set to
Bluetooth
and your device’s
Bluetooth
is, you know, on.
If you’re connecting to a computer, you may have some extra steps on that
end. You’ll have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing code. If
prompted, enter “0000” as the code.
To disable pairing of existing device and pair a new device press and hold
the + and - button for 5 seconds to activate pairing mode.
Note: If you turn on your Classic 2.0 but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more,
the JAM Classic 2.0 will automatically shut off to preserve battery power.
Thank you for purchasing
the
JAM Classic 2.0
.
Check out the sections
below for all the
important information
about your new speaker.
Continued on page 2.
AC adapter not included.
or
2h
CONTROL YOUR DESTINY ... OR AT LEAST YOUR SPEAKER
1. Power button: press and hold for 3 seconds to
power on.
2. Check out how much juice is in the battery
3. Volume down / Previous track
4. Play & pause / Answer & hang up
5. Volume up / Next track
6. Lets you know when
Bluetooth
is paired
7. Micro USB cord goes here
8. Here’s where you hook it up old-school
3
6
7
8
5
2
1
4
Bluetooth
®
Devices
JAM CLASSIC 2.0
on
>
3s
Bottom:
The LED lights on your speaker let
you know what it’s doing.
Pairing Mode
Bluetooth
Light
Battery Light
Connected
Charging
Ready to Party
Aux-In Mode
Low Battery
