Listening to a non-Bluetooth
®
audio device
1. Plug a 3.5mm audio cable (not included), into the AUX audio line input
located on the back of the unit.
2. Plug the other end of the audio cable into the line out or headphone jack
of your audio device.
3. Press the POWER button located on top of the JAM Party.
4. Press play on the connected device.
NOTE:
You may need to adjust the volume on your audio device to achieve
proper volume.
NOTE:
Track forward/reverse and play/pause controls on JAM Party will not
work when using line-in audio jack.
Easy lift handle.
Push to collapse.
To release the
kickstand press
on the dots on
bottom of unit.
Maintenance
Only use a soft dry cloth to clean the enclosure of the unit. NEVER use
liquids or abrasive cleaner to clean.
FCC Warning
NOTE:
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
