Jalja SVJ-4000, Руководство пользователя, Страница: 4 / 8

4
SETUP
Changing Temperature Units

Press and hold the Play/Start button for about 3 seconds to toggle between Fahrenheit
and Celsius temperature units.
Setting the Timer
1. Press the Timer button on the Control Panel , then press the increment button to set the
hours.
2. Press the Timer button to save the hours value, then press the increment button
ordecrement button to set the minutes.
3. Press the Play/Start button to save the minutes value. The Timer buttonwill blink for
about 3 seconds, indicating that your timer is properly set. Once the temperature reaches
the target temperature, the timer will start the countdown.
Setting the Flow Direction
The cooker can circulate water in a clockwise or counterclockwise direction. Additionally, it can
be set to direct the output of the pump into the side of the container, to protect delicate foods,
such as eggs or salmon, or to prevent the water jet from being blocked by food.
1. Twist the Pump Cap clockwise to unlock it from the Pump Housing .
2. Position the openings in the side of the Pump Cap , as desired. Insert the retaining tabs
into the slots, then turn the cap counterclockwise to lock it in place.
Calibrating the Temperature
The temperature sensor on the cooker is extremely accurate and is calibrated at the factory.
However, if you want the readings on the cooker to match that of your thermometer, perform the
following steps to re-calibrate the cooker.
1. Determine the difference between the temperature reading on the cooker and the
temperature reading on your thermometer. You can change the cooker's reading by up to
±9.9°C.
2. Press and hold the Temp button for about 5 seconds. The display will show 0.0°.
3. Press increment button ordecrement button to add or subtract up to 9.9°C.
4. Press the Temp button to save the set value.