Page 3 of 9
Assembly Instructions: Single Section Bookcase
PLACE FIXINGS
2. We’ll start with the left hand (LH) and right hand (RH) Sides. Place the Nickel Cams in all the
available holes, facing outwards. Using the screwdriver, or a power tool on a low setting, screw the
Cam Bolts into the available 5mm holes on the LH & RH Sides. Unlike the 6mm holes, these 5mm
holes do not go all the way through.
Fit a Cam Bolt into each
hole on the top side
Fit a second Cam Bolt into the
same holes on the underside
LH Side
Divider
3. If your design features any Dividers, look for 5mm ‘through’ holes. Each hole requires a Cam Bolt
on each side. Screw in all Cam Bolts required on one side of the Divider, then turn the Divider over,
and screw in Cam Bolts, in the same holes, on the opposite side.