JAKOB HATTELAND JH 20T01 MIL, Руководство пользователя

Страница: 6 / 19

JH 20T01 MIL Industrial Color Display 6
Chapter 3 Precautions
3.1 Unpacking
Handle with care when transporting the display. Do not unpack the display before it is on the
site of use or installation. Although the device can stand on the edge this is not recommended
as the unit may fall over and damage may occur to the device.
It is recommended that you save the original box and packing materials for transportation or
shipment of this display.
3.2 Mounting
Ensure prior to installation that your mounting jig, console or other application are capable of
carrying the display. All four mounting screws applicable in the front of the monitor should
be used for fastening the device.
Also ensure that your fastening threads fits properly to the enclosed fastening screws.
3.3 Recommended use
For optimum performance when setting up and using the display please note the following:
Use 1280 x 1024 resolution at 60 Hz.
The optimum display position is away from direct sunlight.
Install the display just below eye level for the ideal viewing angle.
Allow adequate ventilation around the display so that heat can properly dissipate.
For optimum performance, allow 20 minutes for warm-up.
3.4 Virus
Some of the displays are delivered with a diskette.
Before installing the program from the disk you should READ THIS:
The enclosed disk is thoroughly checked for viruses. While every care is taken neither JHI nor
the producer of the diskette will accepts no responsibility for loss or damage occurred during
installation or use of the content on the diskette. You are strongly advised to have recent,
verified backups of your system files before installing new software. We further advise you to
check the diskette according to your own safety standards (anti virus check).