I. INTRODUCTION.
The „
HAMMER
” strength machine is the amusement device designed for play in bars, clubs, cinemas,
festivities, amusement parks, etc. The machine is profit-making device not paying the money prizes.
The machine is designed and made from state of the art materials and parts available on the market.
Components of the device are compliant with the safety standards, what is confirmed by CE certificate.
II. TECHNICAL PARAMETERS
Height
238 cm
Width
80 cm
Length
115 cm
Total weight
130 kg
Power supply
220 – 240 V
III. PARAMETERS CHANGE HAMMER - SETUP.
To enter SETUP turn-off the machine an holding SETUP key on the MAIN board turn it back on.
Switching between the SETUP items is realised by the following keys:
Confirmation of the selected option - SETUP button
Browsing the options
- up/down button
1 - 6.
Setting credits.
In option 1-3 set number of credits which shall be granted by the machine after a coin is inserted
on the first, second and third coinbox channel. These are double options. The number of games
(left display) and coin value (right display) related to the value may be set.
Example: Push SETUP, when small display is blinking the credit value shall be set, i.e. to 0,5.
Confirm by pushing SETUP, then set the number of pulses related to 1. It means that inserting
two coins on this channel gives 1 credit and 2 pulses on mechanical counter.
Options 4-6 relates to banknotes. Coding is realised the same way as above.
7.
Record.
In this option the machine record value in the range 10 – 999 can be changed.
For that purpose
SETUP
shall be pushed, then the required record value shall be set with use of
up / down
button.
8.
Test hardware.
Pushing appropriate buttons enables performing of the device operation test. After
SETUP
is
pushed the following are tested:
- matrix display
- additional keys
- LED horseshoe
- LED plate
- Sensors (additional and plate)
9. Factory settings.
Pushing the
SETUP
button causes setting of setup options to factory settings.
Initial parameters are: