JAI TM-2030GE Скачать руководство пользователя страница 11

Страница: 11 / 64

Installation

RM/TM-2030GE Series

Installation

The following instructions are provided to help you to set up your camera. We suggest that you read through

these instructions before you unpack and set up the camera system.

2.1

Getting Started

2.1.1

Unpacking Instructions

We recommend that you save the original packing cartons for the cameras and accessories in case you need to

return or exchange an item.

We also recommend that you bench-test any equipment being sent to another location for field installation to

assure that everything is fully operational as a system.

2.1.2

Components

When you receive your TM-2030GE camera from JAI, Inc., the contents of the shipping box should include the

camera and a document download card. If either of these items is missing, please contact your JAI, Inc.

representative immediately. The document download card includes instructions and web locations for

downloading the datasheet, manual, and camera-control software. If you do not have Internet access, please

contact JAI, Inc. to receive this material on a CD-ROM.

2.1.3

Accessories and Options

Following is a list of additional accessories and options that may be required for your application. Please check

with your JAI, Inc. representative before you install your camera to determine what you might need.

•

PD-12U series power supply

•

12P-02S power cable

•

Cat5e or cat6 shielded Ethernet cable (not supplied by JAI, Inc.)

•

Tripod Mounting Kit: TP-20

(for dimensions go to:

www.jai.com/EN/CameraSolutions/Products/Accessories/Pages/Home.aspx

)

2.2

Camera Setup

2.2.1

Heat Dissipation

The TM-2030GE is a compact 1920 by 1080 camera. Since all the electronics have been packed in a compact

package, the outer case of the camera can become hot due to heat dissipation. For optimal performance, JAI,

Inc. recommends using a cooling fan to set up a positive air flow around the camera and following the

precautions below.

•

Mount the camera on a large heat sink (camera bracket) made out of heat-conductive material like

aluminum.

•

Make sure the flow of heat from the camera case to the bracket is not blocked by a non-conductive

material like plastic.

•

Make sure the camera has enough open space around it to facilitate the free flow of air.

2.2.2

Connector Pin Configurations

2.2.2.1

12-Pin Connector

The TM-2030GE has a 12-pin Hirose connector for power input as shown below.

Содержание TM-2030GE

































































Результаты поиска

Содержание TM-2030GE

Отзывы:

Бренды по названию

Популярные бренды

JAI TM-2030GE, Руководство пользователя

Результаты поиска

Содержание TM-2030GE

Отзывы:

Бренды по названию

Популярные бренды