background image

Page 14
TM-2016-8 and TM-2016-8CL Progressive Scan Shutter Camera

Installation

1.

Rotate the connector while applying slight pressure until the keyways line up. 

2.

Press the connector into place until firmly seated.

3.

Plug the power cord into the 100V AC socket. This will power the camera up.

2.2.8 Attaching the Analog Video Output

When connecting the TM-2016-8 to an analog frame grabber or a monitor, use the BNC connector on 
the rear panel of the camera. The input of the monitor should be balanced for 75¾ termination. Standard 
RG-59 type coaxial cable should carry a full video signal for up to 500 feet. 

The multi-conductor cable 12P-02S from JAI, Inc. can be used to transmit analog video, power, sync. 
signals, and serial communication. The mini coaxial leads in JAI, Inc. multi-conductor cables are 
designed for short runs of no longer than 100 feet. 

Note: 

Make sure that no extraneous wires are visible which could cause a short.

2.2.9 Attaching the Camera Lens

The TM-2016-8 camera accepts 1" or larger format size C-mount lenses. To attach the C-mount lens to 
the camera, carefully engage the threads and rotate the lens clockwise until it firmly seats on the 
mounting ring. Do not force the lens if it does not seat properly. Please note that some lenses with 
extremely long flangebacks may exceed the mounting depth of the camera.

The 2016-8 may perform better with a 35mm camera lens if you use the lens in combination with an F 
to C-mount adaptor. 

Содержание TM-2016-8













































Отзывы: