JAI TM-1325 Series, Руководство пользователя

Страница: 12 / 40

TM-1325 Series
4 Installation
2 Installation
The following instructions are provided to help you to set up your camera quickly and easily. We suggest that
you read through these instructions before you unpack and set up your camera system.
2.1 Getting Started
2.1.1 Unpacking Instructions
We recommend that you save the original packing cartons for the cameras and accessories in case you need to
return or exchange an item.
We also recommend that you bench-test any equipment being sent to another location for field installation to
assure that everything is fully operational as a system.
2.1.2 Components List
Please begin by checking your order against the Components List shown below to assure that you have received
everything as ordered, and that nothing has been overlooked in the packing materials. If any item is missing,
please contact your JAI, Inc. representative immediately.
•
TM-1325 camera
•
Document download card (contains web site addresses and instructions for how to download the necessary
documentation and software from JAI, Inc.)
2.1.3 Accessories and Options
Following is a list of additional accessories and options that may be required for your application. Please check
with your JAI, Inc. representative before you install your camera to determine what you might need.
•
Digital output cable (not required for “CL” version)
− 30DG-02 (for standard model only)
−
26CL-02-26 (for Camera Link model only)
•
Serial Communication Kit CS-232E (not required for “CL” version)
Note: For CL models, the control software is included and serial communication is through the Camera Link
cable. No additional accessories are required.
•
PD-12UUP series power supply
•
12P-02S power cable
•
Tripod Mounting Kit: TP-20 (for dimensions go to:
www.jai.com/EN/CameraSolutions/Products/Accessories/Pages/Home.aspx )
2.2 Camera Setup
2.2.1 Heat Dissipation
The TM-1325 camera is a compact 1.3K x 1K camera. Since all the electronics have been packed in a compact
package, the outer case of the camera gets hot due to heat dissipation. JAI, Inc. recommends the following
procedure for optimal performance of the camera:
1. Mount the camera on a large heat sink (camera bracket) made out of conductive material like
aluminum.
2. Make sure the flow of heat from the camera case to the bracket is not blocked by a non-
conducting material like plastic.