JAI Spark SP-5000M-GE2 Скачать руководство пользователя | Manualshive

Страница: 88 / 100

background image

SP-5000M-GE2 / SP-5000C-GE2

- 86 -

8.8.2 Setting for P-iris lens being used

P-iris lenses use an absolute setting value control system and therefore, if the following
parameters are input, precise iris position control is possible.

8.8.2.1 P-Iris lens select

Select the lens used from the P-iris select list. At this moment, there are no 1-inch P-Iris lenses
available in the list. When P-Iris Les Select is opened, the following lenses are indicated but they
are 2/3 inch format. If they are used, the corners of the image may be vignetted.

Table – 29 P-iris lens select

P-Iris lens select

Description

Control step number

Open F value

LM16JC5MM

Kowa 16mm 2/3”

74

F1.4

LM35JC5MM

Kowa 35mm 2/3”

73

F2.0

8.8.2.2 Step max.

Iris control step depends on lens. The setting value uses the value stored in the camera.

8.8.2.3 Position

The iris position can be set between 0 to Step Max. 0 means to open the iris and Step Max

means to close the iris.
In the following conditions, the camera initializes P-iris control and acquires iris position.

1) When the camera is powered

2) When the lens is selected in P-Iris Lens Select

3) If the lens is changed in P-iris Lens Select

8.8.2.4 Current F value

The current F value is indicated by using iris position information. This can be indicated during auto
iris operation. The relation between iris position and F value depends on the lens used.

8.8.2.5 P-Iris Auto min. / P-Iris Auto max.

This function can set the control range when the iris is operated automatically. Auto max. sets the
limit when the iris goes open and Auto min. sets the limit when the iris goes closed. Auto max. can
be set to fully open but Auto min. is stopped at F5.6 as lens performance typically degrades if the
iris is closed beyond this point.

8.8.3 Motorized lenses

The SP-5000C-GE2 and SP-5000C-GE2 can use the 3-axis motorized lens control for zoom, focus and
iris. The following functions are available via the motorized lens commands.

8.8.3.1 Iris

Open: While this command is supplied, the iris will continue to open.

Close: While this command is supplied, the iris will continue to close.

Stop: When this command is supplied, the iris operation stops.

«
...
86
87
88
89
90
...
»

Содержание Spark SP-5000M-GE2





































































































Отзывы:

Нет отзывов

Похожие инструкции для Spark SP-5000M-GE2

Бренд: INDA Страницы: 35

Бренд: Thermo King Страницы: 33

Бренд: Philips Страницы: 3

Бренд: Philips Страницы: 3

Бренд: Philips Страницы: 3

Бренд: Crestron Страницы: 2

DLR-BT001 Series

Бренд: Datalogic Страницы: 49

Бренд: Franklin Страницы: 13

Бренд: Dee Zee Страницы: 2

Бренд: Aqua One Страницы: 8

Бренд: Barska Страницы: 2

Бренд: Tecumseh Страницы: 2

Бренд: Tecumseh Страницы: 2

Бренд: Kintech Engineering Страницы: 12

Бренд: Quest Engineering Страницы: 13

Бренд: LAUNCH TECH Страницы: 96

Бренд: Siemens Страницы: 704

Бренд: IAG Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды