Setting range
Default value
Description
Configure AutoLevelControl.
30 〜 95
50
Set the target level for ALC. (unit: %)
ー
ー
Select the area for which to configure [ALCAreaEnable].
[Setting range]
15:HighLeft, 14:HighMidLeft, 13:HighMidRight, 12:HighRight,
11:MidHighLeft, 10:MidHighMidLeft, 9:MidHighMidRight, 8:MidHighRight,
7:MidLowLeft, 6:MidLowMidLeft, 5:MidLowMidRight, 4:MidLowRight,
3:LowLeft, 2:LowMidLeft, 1:LowMidRight, 0:LowRight
ALCAreaEnable
True, False
True
Enable/disable the photometry area selected in [ALCAreaSelector].
True, False
True
True: Operate ALC with all areas designated as photometry areas,
regardless of the individual enabled/disabled photometry area
states configured in [ALCAreaSelector].
False: Operate ALC according to the individual enabled/disabled
photometry area states configured in [ALCAreaSelector].
1 〜 8
4
Set the response speed for ALC. (8 is the fastest.)
Estimated time to convergence
1: 8sec, 2: 4sec, 3: 3sec, 4: 2sec, 5: 1.5sec, 6: 1sec, 7: 0.75sec, 8: 0.5sec
ー
Idle
You can check the convergence operation status of AGC, ASC, and AWB.
100 〜
ー
Set the minimum value for the ExposureTime control range
101 〜
ー
Set the maximum value for the ExposureTime control range
1 〜 15
1
Set the minimum value for the GainAuto control range
2 〜 16
16
Set the maximum value for the GainAuto control range
0:Off, 1:On
Off
Enable/disable VideoProcessBypass mode.
EdgeEnhancerEnable
True, False
False
Enable/disable EdgeEnhancer. (SP-25000M-CXP4A only)
EdgeEnhancerLevel
0:Low, 1:Middle,
2:High, 3:Strong
Middle
Set the Level for EdgeEnhancer. (SP-25000M-CXP4A only)
GainAutoControlMax
ExposureAutoControlMax
GainAutoControlMin
ALCAreaEnableAll
ExposureAutoControlMin
EdgeEnhancer
VideoProcessBypassMode
Imaging Control
Item
ALCControlSpeed
AutoControlStatus
AutoLevelControl
ALCReference
ALCAreaSelector
—
5
9
—
SP-25000M-CXP4A/SP-25000C-CXP4A
