JAI RMC-675 страница 22 Скачать руководство пользователя

Страница: 22 / 82

RMC-675/RMC-673

Software Introduction & Installation

Figure 10.

Right click to extract the compressed files.

By choosing to “Extract to folder...” (C: normally indicates the hard drive that includes the desktop) the directory is
in the same place as the download, and can be easily moved to any desired location.

Figure 11.

The extraction directory has the same name as the zip file.

3.Open the directory and double-click on setup to begin the RMC-675/RMC-673 software install.

4.Follow the installation instructions.

Note: You can change the installation directory if you want.

4.1.2.1

Uninstalling Previous RMC-675/RMC-673 JAI, Inc. Software

•

If you already have RMC-675/RMC-673 software on the hard drive, the installer asks to uninstall the
software.

•

Accepting the uninstall allows the existing software to be removed. The installer then closes.

•

To initiate a new installation it is necessary to click “Setup” again.

Содержание RMC-675



















































































Результаты поиска

Содержание RMC-675

Отзывы:

Похожие инструкции для RMC-675

Бренды по названию

Популярные бренды

JAI RMC-675, Руководство пользователя

Результаты поиска

Содержание RMC-675

Отзывы:

Похожие инструкции для RMC-675

Бренды по названию

Популярные бренды