manualshive.com logo in svg

JAI Elite EL-2800C-GE2, Руководство пользователя

Поделиться
Скачать
JAI Elite EL-2800C-GE2 Скачать руководство пользователя страница 84

EL-2800M-GE2 / EL-2800C-GE2 

- 82 - 

 

8.8.3.3      Focus+ 

 

Near:  While  this  command  is  supplied,  the  focus  will  continue  to  shift  closer  to  the 

camera. 

 

  Far: While this command is supplied, the focus will continue to move towards infinity. 

 

  Stop: When this command is supplied, the focus operation stops. 

 

8.8.4    Exclusive video output signal for iris control 

 
This signal can be used for automatic lens iris control in Continuous and RCT modes.                                                                                                                                                                                                                                 
This signal is available if AUX Type 2 connector is used for AUX (Factory option). 
The iris video signal is composed to average the video level in the center area of each frame and can 
be output as a composite signal with H-sync.     
The following drawing shows the waveform of the iris control video signal. This signal is output with 
the same video level within the same frame and the average is recalculated with each new frame.   
 

 

 

Fig. 52      Iris video output signal 

The following parameters of this auto iris control signal output can be changed.

 

 

Auto Iris Control Signal Output:

 

   

ON: The auto iris control can be connected with AGC and ASC as ALC function

 

   

OFF: The auto iris control is not connected with AGC and ASC.

 

Iris State Control:

 

Video: Use the iris control in auto mode.

 

   

Close: Force the iris to close.

 

   

Open: Force the iris to open.

 

 

8.9      ALC 

In  the  EL-2800M-GE2  and  EL-2800C-GE2,  auto  gain,  auto  shutter  and  auto  iris  functions  can  be 
combined to provide a wide ranging automatic exposure control from dark to bright or vice versa. 
The functions are applied in the sequence shown below and if one function is disabled, the linkage 
between the other two is maintained. 
 
In order to make the ALC function effective, set the Auto Iris Lens Control Signal Output to “ON”.   
The auto iris function works together with AGC and Exposure Auto.   
                   

If the lighting condition is changed from bright to dark          AIC ― ASC ― AGC 
If the lighting condition is changed from dark to bright          AGC ― ASC ― AIC 

 

Содержание Elite EL-2800C-GE2
































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды