CV-A10 CL and CV-A70 CL
10.2. Specification table
Specifications
CV-A10 CL
CV-A70 CL
Scanning system
Progressive scan
Frame rate full frame
60 frames/sec. Progressive
(625 lines/frame)
Pixel clock
36.15 MHz
Line frequency
37.5 kHz
(964 pixels clock/line)
CCD sensor
1/2”. Monochrome ICX-415AL
1/2”. Color ICX-415AQ
Sensing area
6.4 (h) x 4.8 (v) mm
Cell size
8.3 (h) x 8.3(v)
µ
m
Effective pixels
782 (h) x 582 (v)
Pixels in video output. Full
1/2 partial
¼ partial
1/8 partial
768 (h) x 576 (v) 60 fps
768 (h) x 287(v) 112 fps
768 (h) x 143 (v) 177 fps
768 (h) x 71 (v) 250 fps
Sensitivity on sensor
6 Lux (Min. gain, 100% video)
0.8 Lux (Max gain, 50% video)
14 Lux (Min. gain, 100% video
1.3 Lux (Max. gain, 50% video)
S/N ratio
>55 dB
>54 dB (on Green)
Video output. Digital
8/10 bit Camera Link
Iris video output. Analogue
0.7 Vpp
Gain
Gain range
Manual - automatic
-3 to +12 dB
Manual - automatic
-3 to +12 dB. (–3 to +9 dB in aut.)
Gamma
0.45 – 1.0
1.0
Synchronization
Int. X-tal. Ext. HD/VD or random trigger
Ext HD/VD in.
(Not in binning modes)
4 V
±
2 V. TTL or 75
Ω
terminated
Tracking range for H
37.50 KHz
±
1%
Trigger input. TTL
Camera Link
4 V
±
2 V. TTL or 75
Ω
terminated
Via Camera Link
EEN output
4 V from 75
Ω
source
Trigger modes
Continuous, Edge Pre-Select, Pulse Width Control, and Sensor Gate control
Accumulation
LVAL synchronous or asynchronous
Shutter speed EPS
1/60 to 1/300,000 second
Programmable exposure
1/8 line to 625 lines. (3.3
µ
s to 16.7 ms)
Pulse width control
2 lines to 120 frames.
Auto shutter range
1/60 to 1/25,000
Readout modes
Partial scan. Full, ½, ¼, 1/8
Vertical binning. Off, ½, 1/3, ¼
Horizontal binning. Off, ½, 1/3, ¼
Smearless
Partial scan. Full, ½, ¼, 1/8
Smearless
Control interface
RS 232C or Camera Link
Functions controlled by RS
232C
Shutter, Trigger, Scanning, Read out, Polarity, Black level, Gain, Gamma
Operating temperature
-5
°
C to +45
°
C
Humidity
20 – 80% non-condensing
Storage temp/humidity
-25
°
C to +60
°
C/20% to 90%
Vibration
10G (20Hz to 200Hz, XYZ)
Shock 70G
EMC
CE (EN50081-1 and EN50082-1), FCC part 15 class B
Power
12V DC
±
10%. 4 W. (<0.33A)
Lens mount
C-mount (Flange back 17.526 mm -0.05mm)
Image centre
±
0.1mm from C-mount centre
Dimensions
35 x 44 x 80 mm (HxWxD)
Weight 150g
Note: Above specifications are subject to change without notice
- 34 -
