CV-S3500E
- 21 -
9. Camera configuration and how to use web browser
In order to set up the camera configuration and watch the picture, it is necessary to install the
following software.
Quick time player 7.1 & later : To watch the picture
IE 6/7/8 or Firefox 3.0 or Quick time 7.1 & later : To configure the camera
The following explanation describes the procedure using IE and Quick time. If the PC is not
equipped with all the mentioned software, it is necessary to install it.
9.1. Initial settings
IP address setting
Set IP address at the default address of the CV-S3500E.
There are two ways to set IP address.
1. Set IP address manually
2. Obtain an IP address automatically (Use DHCP server)
9.1.1 Set IP address manually
The fixed IP address (default) of CV-S3500E is as follows (DHCP is OFF)
IP address
: 192.168.30.30
Subnet mask
: 255.255.255.0
Default gateway : none
Set IP address of PC in order to communicate between PC and CV-S3500E
1. Set IP address in the PC
Follow “Start”
→
”Control panel”
→
“Network connections”
→
”Local area
connection”
and “Properties”.
2. In the properties screen, check that “Client for Microsoft Network” and “Internet
protocol(TCP/IP)” are selected.
3. Select “Internet protocol (TCP/IP)” and click “Properties”.
Set IP address as follows.
