Tool change
Item no. 10204044, Revision 02
25 ( 36 )
10
Tool change
CAUTION: Danger of being drawn in by rotating shaft.
If the shaft is still rotating, fingers and hands may be drawn in and crushed.
u
Only change the tool if the shaft is at a standstill.
Example of design: Inserting the
shank
Note: Ensure functionality.
u
Never operate the HF spindle without a clamped tool shank.
If no tool shank is clamped:
q
The clamping system is damaged by the centrifugal forces.
q
The clamping system is shifted.
q
The balance of the HF spindle is affected.
q
The bearing is damaged.
10.1
Manual hollow shank taper
1
Clamping segment
2
Access hole
3
Locking ring
4
Threaded spindle
5
Marking "X"
6
Snap ring
7
Ejector with withdrawal thread
8
Basic body
9
Driver
10
Cam
11
Shaft of HF spindle
12
Mounting spindle
