Jäger B88-M220.01 K1.15S3A, Руководство пользователя

Страница: 27 / 32

Maintenance
Item no. 10002001, Revision 12 27 ( 32 )
12.3 In the case of storage
If the HF spindle is not required for a prolonged period of time:
Ü
Store the HF spindle in horizontal position.
Ü Store the HF spindle so that it is protected from moisture, dust, and other
environmental influences.
Ü Note the following storage conditions.
Temperature of storage location +10°C … + 45° C
Relative humidity < 50 %
12.4 Monthly maintenance
Ü Turn the shaft of the HF spindle at least ten times by hand every four
weeks.
12.5 Long periods of storage
Ü Turn the shaft of the HF spindle at least ten times by hand every three
months.
Ü
Then put the HF spindle into operation with a tool inserted for approx.
10 minutes.
Ä
The speed should be no more than 20 % of the maximum permissible
speed for the HF spindle. (See Commissioning
[
}
22] section)
12.6 Maximum storage time
The maximum storage time is 2 years.
Ü Make sure that all information in the "Long periods of storage [
}
27] " sec-
tion is adhered to. This is the only way in which to maintain the functional-
ity of the HF spindle.