Oxygen Technical Manual
Maintenance
Every 6 months
Clean filters in refresh units
Clean external grilles to remove blockages
Every 12 months
Replace filters in refresh units
Check all electrical connections are tight
Clean heating element
Service central heating system as recommended by boiler manufacturer and heating system
installer. This would typically include, but not limited to:
o
Check operation of all safety valves
o
Check system pressures
o
Check cleanliness of system fluid
o
Check operation of all heating components
Control System
The control system is a fully programmed control system and is maintenance free. Should this
system need to be changed as a result of damage or failure, please contact Jaga Heating Products
(UK) Ltd. See final page for contact details.
Refresh Units
The refresh unit is located inside the radiator casing, and houses the filter element. This will need
to be removed and cleaned / replaced. The filter element is in the bottom section of the refresh unit
and can be removed by sliding it out.
Radiator
The removal of the radiator casing can be found in its own fitting instructions by following in reverse
order.
The casing is manufactured from painted steel and may be cleaned with any normal detergent. Do
not use dry cleaning fluid or any other product containing volatile solvents.
The heating element is manufactured from copper tube, brass collectors with coated aluminium
convector fins. During operation the convector heating element filters dust and coarse particles from
the air. It is important for the efficiency of the convector that the airways are kept clear at all times if
possible. It is advisable to check during routine maintenance that nothing is blocking or obstructing
the top fins (for example; paper, food or other foreign bodies). Also check that there is no build-up of
dust on the underside of the element.
Easy access with a vacuum cleaner to the underside of the convector is possible.
