Jaga CLIMATE DESIGNERS, Инструкция по установке и эксплуатации

Страница: 32 / 36

32
JAGA N.V. | MINI FREESTANDING HYBRID | MANUEL | 2021.03.25 | V.01
6. SETTINGS
6.1. ADJUSTING THE WATER TEMPERATURE
MODE
15 sec
6.1.1. Adjusting the maximum water tempe-
rature for cooling
By reducing the water temperature setting, the
unit will start later. If the water temperature is
set higher, the unit will start sooner.
1. Put the device in the cooling mode
2. Hold down the [
Mode ] and [ + ] simultaneously
until the last 4 LEDs start flashing.
6.1.2. Adjusting the minimum water tempe-
rature for heating
By increasing the water temperature setting,
the unit will start later. If the water temperature
is set lower, the unit will start sooner.
In combination with a heat pump, it may be
necessary to reduce the water temperature.
1. Put the device in heating mode
2. Hold down the [
Mode ] and [ + ] simultaneously
until the last 4 LEDs start flashing.
4. The device returns to the selected mode. (±30sec).
3. Short press the [-] or [+] button to adjust the set temperature.
/ factory default water temperature
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
12 ̊C
18 ̊C
24 ̊C
14 ̊C
20 ̊C
26 ̊C
16 ̊C
22 ̊C
24 ̊C
30 ̊C
36 ̊C
26 ̊C
32 ̊C
38 ̊C
28 ̊C
34 ̊C