DOKUMENTACJA TECHNICZNO RUCHOWA
03-2016
9
3.4 TRANSPORT
Transport the knife gate valves on sheltered vehicles.
The manufacturer recommends slings for transport and installation of valve sizes from DN125 to DN1000.
4 ASSEMBLY AND INSTALLATION
4.1 ASSEMBLY GUIDELINES
The Type 2005, 2905 flange-to-flange knife gate valves can be installed in underground or overground
pipelines both in horizontal or vertical orientation. The knife gate valves are designed for mounting between
flange ends of the pipelines sized for the PN10 bolt hole layout acc. to PN-EN 1092-2: 1999. The gland on
the delivered valve is loose and must be tightened before installation.
4.2 INSTALLATION INSTRUCTIONS
When installing fixtures consult the technical and commercial documentation, check the pipeline
operating conditions and media against the data declared by the manufactured. Every change in operating
conditions requires consultation with the fixture manufacturer.
Before commencing assembly remove the plugs from the main opening and inspect the conditions of
internal surfaces and clean them th
oroughly with water if required
