Jafanda JF100, Руководство пользователя

Страница: 4 / 6

Touch “ ” to turn on
，
the button icon lights become all white,
and the airflow defaults to the first gear operation.In the working
state, touch “ ”again and the machine enters the standby state,
the power button and timer button icon lights will be half-lit, the rest
icon lights will be off.
Touch “ ” to increase and decrease the airflow speed from
Lv1 ,Lv2 and Lv3.
Your appliance will automatically turn OFF/ON after the selected
time. In the standby state , touch “ ” to active automatic turn on,
In the working state , touch “ ” to active automatic turn off.
To set time: touch “ ” 4 times to select (2h/4h/8h/cancel t
iming) respectively.
The ambient light at the bottom of the machine will turn on slowly and
then go out every time you reconnect the adapter and then power
on.
In the working state , touch the “ ” to adjust brightness.
When it goes into standby state , the previous light settings will be
memorized, and the next time you turn it on, it will directly enter the
previous light mode.
5 light modes in turn:
①
25%-
②
50%-
③
100%-
④
icon lights and ambient
light OFF-
⑤
icon lights ON and ambient light OFF
The filter lifespan is 2000 hours, when the remaining time of the filter
life is less than 150 hours, the filter icon light flashes orange , prompting
the user to replace the filter. After replacement, you need to long-press
“ ” for 5+ seconds, the light turns white and the filter time will be
cleared and retime. If not, the filter icon light will flash orange every
time the device is turned on. It is not allowed to reset when the filter
life is > 150 hours.
Mandatory filter life reset method:
In the standby state long press “ ” + “ ” for 5+ seconds, all the
button icon lights flash 6 times and then go out to indicate that the
filter life reset is complete
To prevent accidental touch by children and pets.
Long-press
“ ”
for 3+ seconds to lock, during which all button
icons are off and the control panel cannot be operated by touch,
only the safety lock stays lit.
Long-press
“ ”
for 3+ seconds to unlock, other button icons
resume to light up.
In Night mode, your appliance will continue to purify the air, but
only runs on its quietest setting and with its LCD screen dimmed.
In the working state , touch “ ” to enter sleep mode, and touch
it again to wake up the machine.When the icon lights are all off,
you need to touch any key to lit the sleep button and then
touch “ ” to wake up the machine.
Power button
Fan speed
Sleep mode
Satety lock
Timer switch
Ambient light
Filter reset
button