0 ' $ # # )
0 ' $ # # )
Plumbers' Putty or Caulking
Adjustable Wrench
Phillips Screwdriver
Channel Locks
TOOLS REQUIRED
MOUNT VESSEL FAUCET
Turn off hot and cold water
supplies before beginning.
CAUTION
ROUGHING-IN
DIMENSIONS
5
4
1
6
3
2
5-5/8"
(143mm)
9-3/8"
(238mm)
12-1/2"
(318mm)
3/4"
(19mm)
2-3/8"D.
(60mm)
5-1/4"
(133mm)
8"
(203mm)
CROSS
HANDLE
LEVER
HANDLE
MOUNTING
SURFACE
2-1/8" D.
(54mm)
2" MAX.
(51mm)
1" MAX.
(25mm)
1-1/4" O.D.
(32mm)
NOTE: MOUNTING HOLES
ARE 1-3/8" D. (35mm)
Seat SEAL (1) into groove in ESCUTCHEON BASE (2). Insert VALVE
SHANKS (3) through mounting hole of sink or mounting surface.
Install SPOUT (7) into VALVE BODY (6) opening. Align the slot in SPOUT (7) with
the threaded hole in VALVE BODY (6). Thread SET SCREW (8) into VALVE BODY (6)
and tighten with a flat blade screw driver to secure SPOUT (7). Insert PLUG
BUTTON (9) into back of SET SCREW (8).
CAUTION: Be careful not to damage
SPOUT O-RINGS (10) when installing SPOUT (7).
Assemble FIBER WASHER (4) and LOCKNUT (5) onto threads of
VALVE SHANKS (3) from underside of lavatory or mounting surface.
Align FAUCET (6) and tighten LOCKNUTS (5) to secure
FAUCET (6) to mounting surface.
7
10
8
9
6
DRAIN INSTALLATION
Assembly GASKET (2) WASHER (3) and LOCKNUT (4) onto DRAIN BODY (1).
Tighten LOCKNUT (4) firmly.
Assembly TAILPIECE (5) to DRAIN BODY (1).
Apply a bead of PUTTY to underside of FLANGE on DRAIN BODY (1)
Feed DRAIN BODY (1) down through lavatory.
LAVATORY
PUTTY
2
3
4
5
1
!
MAKE WATER SUPPLY CONNECTIONS
Connect water supply to FAUCET (1) with 1/2" IPS
FLEXIBLE SUPPLIES (2) or 3/8" O.D. BULL-NOSE RISERS (3).
Use wrench to tighten connections.
Do not over tighten. Be careful not to kink copper supply when
bending. Use tubing cutter to cut to proper length.
Loop FLEXIBLE SUPPLIES (2) if necessary to avoid kinking.
1
2
3
NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS MUST BE
PURCHASED SEPARATELY.
FERRULE
SLOT
COUPLING NUT
