ROUGHING-IN
DIMENSIONS
1 0 9 6 4 9
1 0 9 6 4 9
Phillips Screwdriver
TOOLS REQUIRED
OPTIONAL TO
FINISHED FLOOR
C/L
The wall mounted accessories (1) work best if secured to a wall stud or cross brace within the wall, using the SCREWS (2) supplied.
If the WALL MOUNTED ACCESSORIES (1) are to be installed on a tile or plaster wall the ANCHORS (4) and SCREWS (2) should be used.
Secure MOUNTING PLATE (3) to wall with SCREWS (2).
For installations on drywall or tiled walls:
Use ANCHORS (4) and SCREWS (2) for securing MOUNTING PLATE (3) to finished wall.
Drill two 1/4" dia. holes a minimum of 1-3/4" deep. Insert the two ANCHORS (4) flush with face of the finished wall.
Determine desired height and location (optional) and mark a center line. Using the MOUNTING PLATE (3) as a template mark the two
spots for the ANCHORS (4). If MOUNTING PLATE (3) is secured to a stud or cross brace drill small pilot holes for SCREWS (2).
1
INSTALL WALL BRACKET
2
INSTALL ACCESSORY
2
1
3
4
3
4
2
FINISHED WALL
OPTIONAL TO
FINISHED FLOOR
031/460 (18")
031/600 (24")
031/800 (30")
Install WALL MOUNTED ACCESSORY (1) onto installed MOUNTING PLATE (3). Push WALL MOUNTED ACCESSORY (1) flush against
finished wall and tighten SET SCREW (5) with HEX WRENCH (6) supplied with accessory.
Note: Installation is typical for all wall mounted accessories.
Robe Hook
Robe Hook
Robe Hook
Soap Dish
Tissue Holder
Spare Tissue
Holder
Tissue Holder
Spare Tissue Holder
Tumbler
Soap Dish
Towel Bar
Drill
Level
10'
Tape
Measure
Tumbler
Regular Screwdriver
Lotion Dispenser
1 - 3 / 8 "
3 / 8 "
1 / 2 "
1 - 3 / 8 "
3 / 4 "
1 8 - 1 / 8 " - 3 1 - 1 / 2 "
1 - 3 / 4 "
3 / 4 "
Glass Shelf
Lotion Dispenser
6 "
1 - 3 / 8 "
3 - 1 / 4 "
3 - 3 / 4 "
1 - 3 / 8 "
6 "
3 / 4 "
2 - 5 / 8 "
2 "
6 - 1 / 2 "
1 - 3 / 8 "
2 - 5 / 8 "
4 "
3 / 4 "
5-1/4"
1-3/8"
5-1/4"
3/4"
3-1/2"
5-1/8"
3-1/8"
2"
6-3/8"
1-3/8"
3-3/4"
3-1/4"
3/4"
3-3/4"
17-5/8"
23-5/8"
24-3/8"
3/4"
4-1/4"
6
5