JADEVER SCALE CO.,LTD
NWTE WEIGHING SCALE PAGE
3
Simple Counting
1. Press to select the unit “PCS”.
2. Press
to choose the sampling amount .Available options are =
(10 pieces),
=
(2 pieces), =
(50 pieces), and =
(100 pieces).
3. Put
the
corresponding samples on the weighing pan, then press ..
“
” is displayed momentarily before the display reverts to the sample size. Remove the
samples and put the load on, the scale begins to count.
NOTE
:
◎
The larger the sample size, the more accurate unit weight.
◎
The sampling result is retained when the unit is turned on.
Setting mode
1. Press and hold
while turning on the scale. Do not release
till the OFFSET
value is displayed.
2. Press
, the screen displays “
”
3. Press
to step through available settings
4. Press
to initial the displayed setting , then press
to step through internal
parameters .
5. Press
to save the setting , press
to exit without saving.
6. Press key
to save the settings and back to the weighing mode.
Description of Parameter Values
Set the brightness of the LED display. The higher the setting, the brighter.
Options are 1,2,3 and 4(level)
Set the period of inactivity before the scale automatically turns off. Options are
NO=non power-off, 5,10 and 15( minutes).