(II)
JWL 5
4-3 Power supply
Please verify the local AC power source and switch the two-stage switch to the proper place
before plugging into the power outlet.
Alternative power supply
1) AC 110V/220V (AC±10%)
2) (6V/4A) Internal Rechargeable Battery
Power Consumption
About 300 mW without backlight
About 380 mW with backlight
Low Battery Warning
When
appears in the upper left corner of the weight window, the battery requires
recharging. The charge lamp turns green from red when the recharging is completed (which
takes about 8 hours).Disconnect the scale from power supply when it is fully charged.
5 Function Setting and
Description of Parameter Values
5-1
Function Setting
1. Press and hold
M-/SET
while powering on or long press
M-/SET
under normal weighing
mode to enter function setting. The window displays
“check
”. Setting item “
P00
” displays
momentarily at the left bottom
2. Press
/MR
or
TARE/
to shift between the functions
3. Press
M-/SET
to enter the parameter setting.
4. Press
/MR
or
TARE/
to shift between the function parameters
5. Press
M+/SAVE
to save and return.
6. Press
ZERO/ESC
to exit without saving.
1. Memory recall
2. Select the former parameter in the same level
3. Select the former record when checking the accumulation record
4. Shift keys leftwards
1. During setting value, add 1 to the current value
2. Set the upper limit of the check weighing
3. Print
1. During setting value, deduct 1 to the current value
2. Set the lower limit of the check weighing
3. Hold function
