Jadever Jadever SKY, Руководство пользователя, Страница: 7 / 10

Electronic Scale 6
↓
Pr Fu
External device PC/ SH-24 Item 10, Page 7
↓
diV-Z
Display range Zero0/1/2/3/4/5 Item 11, Page 7
1. When the LCD display shows Count, press the
「
UNIT
」
key, the current internal value
will be displayed. Press
「
UNIT
」
to return to LCD display Count.
2. When the LCD display shows unit , press
「
UNIT
」
to enter into unit selection mode,
the screen will show on g or oFF g ,
“on” means to use the current unit
displayed,
“oFF” means not to use the current unit displayed. Press
「
SMPL
」
to switch
between ON and OFF [to use the unit displayed select
“on”, if you do not require the
unit displayed select
“oFF”]. Press
「
UNIT
」
to select from 13 kinds of weighing units,
after selecting the unit required, press
「
MODE
」
to return to LCD display unit .
3. When the LCD display shows InitU , press
「
UNIT
」
to enter initial unit selection
mode. LCD display InitU
xx
X means the initial unit is selected. Press
「
UNIT
」
to
select the unit required, then Press
「
MODE
」
to return to LCD display InitU.
4. When the LCD display shows Auto , press
「
UNIT
」
to enter the Auto Power-Off
selection. LCD display XXX X means Auto Power-off selection. Press
「
UNIT
」
to
select the auto power-off time, then press
「
MODE
」
to return to LCD display Auto .
『
Au-no- means No auto power-off, 5- means 5 minutes, 15- means 15 minutes,
30- means 30 minutes, 60- means 60 minutes
』
(in case of instability, the auto power-off
function will not work)
5. When the LCD display shows bAud , press
「
UNIT
」
to enter the RS-232 Baud
Rate selection. LCD display XXX X represents the RS-232 baud rate. Press
「
UNIT
」
to select the desired RS-232 baud rate, then press
「
MODE
」
to return to LCD
display bAud .
『
2400, 4800, 9600
』
6. When the LCD display shows ZEro , press
「
UNIT
」
to enter auto zero range
selection. LCD display d X X represents the auto zero range. Press
「
UNIT
」
to
select the desired auto zero range, then press
「
MODE
」
to return to LCD display
ZEro
。
『
d0, 1, 2, 3, 4, 5
』
(the higher the value is, the wider auto zero range is)
7. When the LCD display shows FiL , press
「
UNIT
」
to enter filter setting mode.
LCD display FiL X X means the filter level. Press
「
UNIT
」
to select the desired
filter level and press
「
MODE
」
to return to LCD display FiL .
『
FiL1, 2, 4, 8
』
(the higher the value is, the higher the filter level is)
8. When the LCD display shows LigH , press
「
UNIT
」
to enter backlight setting mode.