JSLCT-SOL SERIES OFF-GRID SOLAR SIGN LIGHT
WWW.JADEMAR.COM
Miami, FL USA - [email protected]
T: 305.640.0465 - F: 305.640.0468
6.0 INSTALLATION STEPS - INSTALLATION WITH BRACKETS
Revised 01/2022
Page of
2
3
1.
Using the brackets as a template, mark out and drill the moun ng holes for the bracket. Insert the wall anchors provided.
2.
Fix the two brackets onto the sides of the light. Use the exis ng screws in the bracket fixing loca on by removing the screws and reinsta ng them with the
brackets in place.
3.
Install the brackets into the pre-drilled wall holes making sure to use the washers. Tighten the screws and check the unit is square and straight.
4.
Turn on the main power bu on to ac vate the LED display under the solar panel.
(Model-3
0 only)
1 and Model-6
7.0 INSTALLATION STEPS - DIRECT FIXED TO THE WALL
1.
Mark out and drill the moun ng holes to correspond with the moun ng loca ons on the light. Insert the wall anchors provided.
2.
Insert the screws into the wall anchors and ghten.
3.
Directly hang the unit onto the screws, ensuring the unit is square and straight.
4.
Turn on the main power bu on to ac vate the LED display under the solar panel.
Notes:
1.
All screws and bolts must be ghtened firmly.
2.
Only press the main power bu on once. The light will operate automa cally at night.
3.
Please charge the product for 6-8h before use.
8.0 NOTES
1.
The solar light will automa cally turn off when it detects low voltage from the ba ery. This may happen a er 3-4 cloudy days. For best charging performance,
please place light in direct sunlight.
2.
To test the light during daylight hours, fully cover the solar panel and press the main power bu on.
Note:
This product uses a series of 3.7V, 2200mAh rechargeable lithium ba ery
BATTERY WARNINGS –
Do not dispose of ba eries in regular household waste. Do not get the ba eries wet, hot or in contact with flames.
Dispose of ba eries at your local ba ery recycle center. Do not expose to flames or other corrosive material. Follow avia on safety
guidelines were applicable.
INSTALLATION INSTRUCTIONS
