1. Supply lines should be purged to clean impurities before connecting the
unit. (hot water on left, cold water on right).
2. Hole size for deck mounted: Ø32-Ø35(mm).
3. Twist off the ABS lock-nut (1) and washers.
4. Put the braided hoses from bottom of the table hole. Connect the red
braided hose to hot water inlet and the blue one to cold water inlet.
5. Install the lock-screw to the basin mixer and put it into the mounted
hole. Then put the washers to the lock-screw from the bottom.
6. Tighten with the ABS lock-nut.
7. Connect the braided hoses to the cold and hot angle valve correctly .
8. Flexible hose on the outlet interface and on the ball.
Pull-out kitchen faucet
Installa�on Instruc�on
Installa�on drawing
Product accessories
Applica�on
Cleaning and maintenance
1. Use soap and water to remove lime stains
from chrome surface. Don't use acidic
detergents, scouring pads or steel wool;
otherwise the chrome parts will be damaged
2. Use soap and water to clean installation
accessories, such as plastic or rubber
components. Don't use acidic detergents,
scouring pads, alcohol cleaners or steel wool.
Warranty
Nominal Diameter
G1/2
General Medium
Water
Water Pressure
0.05Mpa-1.0Mpa
Recommended Pressure
0.1Mpa-0.6Mpa
Temperature Range
4 C - 90 C
Jade bath warrants its faucets to be leak
and drip free during normal residen�al use
for 1 year from original date of purchase. If
the faucet should leak or drip during normal
use, kindly contact our support team
.
Damages caused by accident, misuse or
abuse will void-this warranty. Under this
warranty, you(the customer), is entitled to
replacement parts at no cos� o repair and
restore functionality if any part of the
product were to fail. NO labor is provided.
Proof of purchase (original purchasing
receipt) must be provided to Jade Bath in
order to claim for warranty.
808005-607-181106
1. Supply lines should be purged to clean
impuri�es before connec�ng the unit. (hot
water on le�, cold water on right).
2. Hole size for deck mounted: 32- 35(mm).
3. Twist off the ABS lock-nut (1) and washers.
4. Put the braided hoses from bo�om o� he
table hole. Connect the red braided hose to
hot water inlet and the blue one to cold
water inlet.
5. Install the lock-screw to the basin mixer and
put it into the mounted hole. Then put the
washers to the lock-screw from the bo�om.
6. Tighten with the ABS lock-nut.
7. Connect the braided hoses to the cold and
hot angle valve correctly
.
8. Flexible hose on outlet interface.and on the
ball.
1. Turn the handle le� and right, le� for hot
water, and right for cold water.
1
3 8
"
1. Main body
2. Cartridge
3. Handle
7. ABS Lock-nut
6. Ball
4. Elbow
5. Handle shower
360
pu
ll
out
20
4 5
"
8
1
4
"
2
1
8
'
2-9/16
UNEF
M15X1
M34X1.5
13/8"~ 1
1
2
"
8. SS Braided hose
8603-01-10
Pull-out kitchen faucet
Installa�on Instruc�on
Installa�on drawing
Product accessories
Applica�on
Cleaning and maintenance
1. Use soap and water to remove lime stains
from chrome surface. Don't use acidic
detergents, scouring pads or steel wool;
otherwise the chrome parts will be damaged
2. Use soap and water to clean installation
accessories, such as plastic or rubber
components. Don't use acidic detergents,
scouring pads, alcohol cleaners or steel wool.
Warranty
Nominal Diameter
G1/2
General Medium
Water
Water Pressure
0.05Mpa-1.0Mpa
Recommended Pressure
0.1Mpa-0.6Mpa
Temperature Range
4 C - 90 C
Jade bath warrants its faucets to be leak
and drip free during normal residen�al use
for 1 year from original date of purchase. If
the faucet should leak or drip during normal
use, kindly contact our support team
.
Damages caused by accident, misuse or
abuse will void-this warranty. Under this
warranty, you(the customer), is entitled to
replacement parts at no cos� o repair and
restore functionality if any part of the
product were to fail. NO labor is provided.
Proof of purchase (original purchasing
receipt) must be provided to Jade Bath in
order to claim for warranty.
808005-607-181106
1. Supply lines should be purged to clean
impuri�es before connec�ng the unit. (hot
water on le�, cold water on right).
2. Hole size for deck mounted: 32- 35(mm).
3. Twist off the ABS lock-nut (1) and washers.
4. Put the braided hoses from bo�om o� he
table hole. Connect the red braided hose to
hot water inlet and the blue one to cold
water inlet.
5. Install the lock-screw to the basin mixer and
put it into the mounted hole. Then put the
washers to the lock-screw from the bo�om.
6. Tighten with the ABS lock-nut.
7. Connect the braided hoses to the cold and
hot angle valve correctly
.
8. Flexible hose on outlet interface.and on the
ball.
1. Turn the handle le� and right, le� for hot
water, and right for cold water.
1
3 8
"
1. Main body
2. Cartridge
3. Handle
7. ABS Lock-nut
6. Ball
4. Elbow
5. Handle shower
360
pu
ll
out
20
4 5
"
8
1
4
"
2
1
8
'
2-9/16
UNEF
M15X1
M34X1.5
13/8"~ 1
1
2
"
8. SS Braided hose
8603-01-10
Pull-out kitchen faucet
Installa�on Instruc�on
Installa�on drawing
Product accessories
Applica�on
Cleaning and maintenance
1. Use soap and water to remove lime stains
from chrome surface. Don't use acidic
detergents, scouring pads or steel wool;
otherwise the chrome parts will be damaged
2. Use soap and water to clean installation
accessories, such as plastic or rubber
components. Don't use acidic detergents,
scouring pads, alcohol cleaners or steel wool.
Warranty
Nominal Diameter
G1/2
General Medium
Water
Water Pressure
0.05Mpa-1.0Mpa
Recommended Pressure
0.1Mpa-0.6Mpa
Temperature Range
4 C - 90 C
Jade bath warrants its faucets to be leak
and drip free during normal residen�al use
for 1 year from original date of purchase. If
the faucet should leak or drip during normal
use, kindly contact our support team
.
Damages caused by accident, misuse or
abuse will void-this warranty. Under this
warranty, you(the customer), is entitled to
replacement parts at no cos� o repair and
restore functionality if any part of the
product were to fail. NO labor is provided.
Proof of purchase (original purchasing
receipt) must be provided to Jade Bath in
order to claim for warranty.
808005-607-181106
1. Supply lines should be purged to clean
impuri�es before connec�ng the unit. (hot
water on le�, cold water on right).
2. Hole size for deck mounted: 32- 35(mm).
3. Twist off the ABS lock-nut (1) and washers.
4. Put the braided hoses from bo�om o� he
table hole. Connect the red braided hose to
hot water inlet and the blue one to cold
water inlet.
5. Install the lock-screw to the basin mixer and
put it into the mounted hole. Then put the
washers to the lock-screw from the bo�om.
6. Tighten with the ABS lock-nut.
7. Connect the braided hoses to the cold and
hot angle valve correctly
.
8. Flexible hose on outlet interface.and on the
ball.
1. Turn the handle le� and right, le� for hot
water, and right for cold water.
1
3 8
"
1. Main body
2. Cartridge
3. Handle
7. ABS Lock-nut
6. Ball
4. Elbow
5. Handle shower
360
pu
ll
out
20
4 5
"
8
1
4
"
2
1
8
'
2-9/16
UNEF
M15X1
M34X1.5
13/8"~ 1
1
2
"
8. SS Braided hose
8603-01-10
Pull-out kitchen faucet
Installa�on Instruc�on
Installa�on drawing
Product accessories
Applica�on
Cleaning and maintenance
1. Use soap and water to remove lime stains
from chrome surface. Don't use acidic
detergents, scouring pads or steel wool;
otherwise the chrome parts will be damaged
2. Use soap and water to clean installation
accessories, such as plastic or rubber
components. Don't use acidic detergents,
scouring pads, alcohol cleaners or steel wool.
Warranty
Nominal Diameter
G1/2
General Medium
Water
Water Pressure
0.05Mpa-1.0Mpa
Recommended Pressure
0.1Mpa-0.6Mpa
Temperature Range
4 C - 90 C
Jade bath warrants its faucets to be leak
and drip free during normal residen�al use
for 1 year from original date of purchase. If
the faucet should leak or drip during normal
use, kindly contact our support team
.
Damages caused by accident, misuse or
abuse will void-this warranty. Under this
warranty, you(the customer), is entitled to
replacement parts at no cos� o repair and
restore functionality if any part of the
product were to fail. NO labor is provided.
Proof of purchase (original purchasing
receipt) must be provided to Jade Bath in
order to claim for warranty.
808005-607-181106
1. Supply lines should be purged to clean
impuri�es before connec�ng the unit. (hot
water on le�, cold water on right).
2. Hole size for deck mounted: 32- 35(mm).
3. Twist off the ABS lock-nut (1) and washers.
4. Put the braided hoses from bo�om o� he
table hole. Connect the red braided hose to
hot water inlet and the blue one to cold
water inlet.
5. Install the lock-screw to the basin mixer and
put it into the mounted hole. Then put the
washers to the lock-screw from the bo�om.
6. Tighten with the ABS lock-nut.
7. Connect the braided hoses to the cold and
hot angle valve correctly
.
8. Flexible hose on outlet interface.and on the
ball.
1. Turn the handle le� and right, le� for hot
water, and right for cold water.
1
3 8
"
1. Main body
2. Cartridge
3. Handle
7. ABS Lock-nut
6. Ball
4. Elbow
5. Handle shower
360
pu
ll
out
20
4 5
"
8
1
4
"
2
1
8
'
2-9/16
UNEF
M15X1
M34X1.5
13/8"~ 1
1
2
"
8. SS Braided hose
8603-01-10
Pull-out kitchen faucet (FRENCH)
8603-01-10
Pull-out kitchen faucet
8603-01-10
Installation Instruction:
Installation Instruction:
1. Supply lines should be purged to clean impurities before connecting the
unit. (hot water on left, cold water on right).
2. Hole size for deck mounted: Ø32-Ø35(mm).
3. Twist off the ABS lock-nut (1) and washers.
4. Put the braided hoses from bottom of the table hole. Connect the red
braided hose to hot water inlet and the blue one to cold water inlet.
5. Install the lock-screw to the basin mixer and put it into the mounted
hole. Then put the washers to the lock-screw from the bottom.
6. Tighten with the ABS lock-nut.
7. Connect the braided hoses to the cold and hot angle valve correctly .
8. Flexible hose on the outlet interface and on the ball.
1. Use soap and water to remove lime stains from chrome surface.
Don’t use acidic detergents, scouring pads or steel wool; otherwise the
chrome parts will be damaged.
2. Use soap and water to clean installation accessories, such as plastic or
rubber components. Don’t use acidic detergents, scouring pads, alcohol
cleaners or steel wool.
1. Use soap and water to remove lime stains from chrome surface.
Don’t use acidic detergents, scouring pads or steel wool; otherwise the
chrome parts will be damaged.
2. Use soap and water to clean installation accessories, such as plastic or
rubber components. Don’t use acidic detergents, scouring pads, alcohol
cleaners or steel wool.
1. Turn the handle left and right, left for hot water, and right for cold
water.
1. Turn the handle left and right, left for hot water, and right for cold
water.
Application:
Application:
Warranty:
Warranty:
Nominal Diameter
G1/2
General Medium
Water
Water Pressure
0.05Mpa-1.0Mpa
Recommended Pressure
0.1Mpa-0.6Mpa
Temperature Range
4°C - 90°C
Nominal Diameter
G1/2
General Medium
Water
Water Pressure
0.05Mpa-1.0Mpa
Recommended Pressure
0.1Mpa-0.6Mpa
Temperature Range
4°C - 90°C
Jade Bath warrants its faucets to be leak and drip free during normal
residential use for 1 year from original date of purchase. If the faucet
should leak or drip during normal use, kindly contact our support team.
Damages caused by accident, misuse or abuse will void this warranty.
Under this warranty, you (the customer), are entitled to replacement parts
at no cost to repair and restore functionality if any part of the product were
to fail. NO labor is provided. Proof of purchase (original purchasing receipt)
must be provided to Jade Bath in order to claim for warranty.
Jade Bath warrants its faucets to be leak and drip free during normal
residential use for 1 year from original date of purchase. If the faucet
should leak or drip during normal use, kindly contact our support team.
Damages caused by accident, misuse or abuse will void this warranty.
Under this warranty, you (the customer), are entitled to replacement parts
at no cost to repair and restore functionality if any part of the product were
to fail. NO labor is provided. Proof of purchase (original purchasing receipt)
must be provided to Jade Bath in order to claim for warranty.
Cleaning and maintenance:
Cleaning and maintenance:
Installation Drawing
Installation Drawing
Product accessories
Product accessories
808005-607-181106
808005-607-181106
