Jacuzzi SWIMSPA Series, Руководство пользователя

Страница: 43 / 56

43
7. Use only chemicals and cleaners recommended by Jacuzzi.
8. Remember to keep swim spa covered when not in use. Maintaining proper water
levels assures efficient operation and efficient electrical usage.
8. Do not expose your swim spa to the sun for extended periods of time as UV rays can
damage the interior surface.
9. Use caution when removing cover. Before removing cover, assure all locks have been
released to avoid lock breakage and / or cover strap damage.
12.8 Winterizing
Your Jacuzzi swim spa is designed to automatically protect itself against freezing when oper-
ating properly. During periods of severe freezing temperatures, you should check periodically
to be certain that the electrical supply to the spa has not been interrupted. In extreme, bitter
cold weather (less than 0
o
C) we recommend that the circulation pump is set for 24-Hour oper-
ation and that the auto-heating is selected to protect against damage to the swim spa.
If you do not intend to use your swim spa, or if there is a prolonged power outage during
periods of severe freezing temperatures,
it is important that all water be removed from
the swim spa and equipment to protect against damage from freezing.
Expert winterization of your swim spa is highly recommended; contact your authorized
Jacuzzi dealer. In emergency situations, taking the following steps can minimize damage.
1. Follow the directions for draining the swim spa.
2. Turn the massage / diverter selector(s) into the middle combo position to allow the
water in the plumbing lines to drain.
3. Turn the waterfall valve to the open position to allow the water in the plumbing
lines to drain.
4. Ass the water level drops below the seats, use whatever means necessary to get the wa-
ter out of the recessed seating areas and into the footwell, such as a wet / dry vacuum.
5. Open all the air controls and leave them open until you resume use of the swim spa.
6. When the water level ceases to drop, use whatever means available to remove any
remaining water from the footwell, such as a wet / dry vacuum.
7. Remove the equipment-side cabinet panels and locate the drain plugs in the front
of each pump. Remove these plugs to allow for water to drain out of the pumps and
heater.
CAUTION: TURN OFF POWER TO SWIM SPA.