General Operation Information. ....................................................................................................................................... 2
Reference Illustration for a Pure Air® System. ................................................................................................................ 3
Pure Air® Operation. ....................................................................................................................................................... 4
Pure Air® Auto-Dri™ Air Channels. ................................................................................................................................. 5
Reference Illustration for a Whirlpool System. ................................................................................................................ 6
Whirlpool Operations. ...................................................................................................................................................... 7
RapidHeat™. ................................................................................................................................................................... 9
Cleaning. ....................................................................................................................................................................... 10
Suction Cover Maintenance. ......................................................................................................................................... 10
Reference Illustration for a Salon® Spa System. ...........................................................................................................11
Salon® Spa Operations. ................................................................................................................................................ 12
Troubleshooting Procedures. ........................................................................................................................................ 13
Notes: ............................................................................................................................................................................ 14
Table of Contents
General Operation Information
All bathtubs manufactured by Jacuzzi Luxury Bath are designed for “fill and drain,” which means the bathtub should be
drained after each use and filled with fresh water by the next bather. This is a health precaution, as these bathtubs are not
designed to hold water continuously like pools or spas.
Close the drain and fill the bathtub until water is at least 1" to 2" (25 mm to 51 mm) above the highest jet or air inlet (see
water line indicated in the illustration - Figure 1). Do not turn on the Whirlpool or Pure Air® system at any time if the jets
or air inlets are not completely immersed in water. Running the Whirlpool or Pure Air® system when there is insufficient
water in the bathtub could result in water spraying outside the bath area.
ATTENTION:
When exiting the bathtub, the water level will drop below the jets which could result in water being
sprayed out of the unit. To prevent this, you must turn unit OFF before exiting bathtub.
Fill to at least 1" to 2"
above highest jet
Fig. 1
Page 2
www.jacuzzi.com
