6
3.3 J200 Control Panel
Used on:
• 2012+ J-280, J-275, J-245, J-235
• 2011 2-pump J-280 and J-270
Used on:
• 2013+ J-210
• 2011-2012 1-pump J-230 and J-210
A. Mid 2013+ P/N 6600-501 SMT panel
B. 01/2013-Mid 2013 6600-329
C. 2009-2012 P/N 2600-329
A. Mid 2013+ P/N 6600-500 SMT panel
B. 2009-Mid 2013 P/N 2600-333
1
A
B
C
E
G
F
1
2
A
B
C
D
E
G
F
Button
Function
A
LED Display: Can display current water temperature (default display), water temperature setpoint, selected
filtration/heating mode, and error messages.
B
Heat Indicator: Lit when heater is on.
C
Jets 1 Button: Turns jets pump #1 on and off. Press once for low speed; a second time for high speed and a
third time to turn off.
D
Jets 2 Button: Turns high-speed jets pump #2 on and off. Press once to turn on; a second time to turn off
(2-pump models only)
E
Light Button:
With standard incandescent light: Turns underwater light on and off.
With optional (2011-2012)/standard (2013+) LED lighting system: Turns underwater light and top rim accent
lights on in one of three random modes or one of seven solid colors.
F
Warmer Button: Increases water temperature setpoint.
G
Cooler Button: Decreases water temperature setpoint.
OPERATION DETAILS
• Temperature Adjustment: 65 to 104°F (18 to 40°C); temperature override not possible. Software default setting is
100°F (38°C).
• Light System Operation: Light runs for 1 hour then shuts off.
• Jets Button Operation: Jets run for 20 minutes after activated then turn off automatically to conserve energy.
Simply press JETS Button to continue operation for an additional 20 minutes.
