Page 40
J-400 Series
When a programmed filter/heating cycle activates, the LCD screen
displays the following message:
1*
At any time, you may check the programming of any aspect of any filter/
heating cycle by first pressing
CYCle
button then moving through
the menu by pressing either
CYCle
or
seleCT
button. The
programming is changed only by pressing
warmer
or
COOler
buttons during this process.
12.3
adjusting Time of Day
The Sentry control system remembers the time of day even in the event
of a prolonged power outage. However, it may occasionally be necessary
to reset the time of day. For example: if you are not in the Pacific Time
Zone you will want to reset the time for your own time zone. (The
system will automatically adjust to and from daylight savings time.) To
accomplish this, press
DIsPlaY
,
mODe
and
DIsPlaY
buttons within five seconds each. A number representing the hour will
be displayed, followed by AM or PM. The hour will advance or decrease
each time
warmer
or
COOler
button is pressed within
five seconds. Then, press
DIsPlaY
button again to display the
minutes. Adjust the minutes as necessary by pressing
warmer
or
COOler
button. After 5 seconds, the display will return to normal
and save your settings.
12.4
main Control Panel lock
To help prevent unauthorized use of your spa, the Sentry controls
incorporate a unique panel locking system which disables the controls on
the panel.
•
To Lock The Main Control Panel:
Press
DIsPlaY
,
mODe
,
and
warmer
buttons within five seconds
each. A padlock symbol will appear on the LCD screen. With
the panel locked, all components are disabled from modifications
and
the only settings that can be adjusted are the standard and economy
filter/heating
modes and time of day. All automatic spa functions will
operate normally.
•
To Unlock Main Control Panel: Press
DIsPlaY
,
mODe
, and
COOler
buttons within five seconds.
The “lock” symbol will disappear. All buttons are now active.
*Note: Number will vary
according to which
filter cycle is being
programmed.
LOCKED
LOCKED
