Jacuzzi hydromassage, Использование и обслуживание

Страница: 40 / 72

40
J
acuzzi® tubs may be equipped with a sanitation system pre-fitted at the factory.
by JA
CUZZ
I ®
F
F
F
F
by
JACUZZI
®
A
A
D
E
D
E
D
D
E
■
Operate the adjustment knobs on the face plate (A) to shut off the air: this will prevent
forming foam while the pump is running.
Also check that all the hydromassage nozzles are open.
■
To activate the sanitisation cycle, press and hold button (D) for approximately 4 sec-
onds (this stops the cycle being accidentally started).
■
The cycle will be carried out in a sequence of steps which are needed for complete,
effective sanitation:
- At start-up, the pump comes on and pumps a preset amount of J-MX 07 liquid into the
water circuit.
Models with
sanitisation system
In models with sanitation system,
fill the tank with the liquid provided
for sanitising the water circuit.
We recommend the use of J-MX 07
disinfectant, suggested by Jacuzzi®,
which can be found at Jacuzzi® Service
Centres and Authorised Retail.
For maximum safety, the electronic
circuit which controls the various
functions prevents from start the
sanitation cycle when a hydromas-
sage is in progress and vice versa.