background image

03-28-2018

ROMAN TUB FAUCET  

 

73-BRT2-J – Polished chrome finish 

73-BRT2-BN-J – Brushed nickel finish 

73-BRT2-ORB-J – Oil rubbed bronze finish 

 

PACKAGE AND HARDWARE CONTENTS

ADA

PART

DESCRIPTION

QUANTITY

A

C

B

D

A

Spout assembly

1

B

Hot handle assembly

1

C

Cold handle assembly

1

D

Hose

2

SAFETY INFORMATION

Please read and understand this entire manual before attempting to  

assemble, operate or install the product. 
WARNING
  •   Protect your eyes with safety glasses when cutting or soldering water supply 

lines. 

CAUTION
  •   If you solder the joints during installation, the seats, cartridges, and washers 

must be removed before using a flame or the warranty will be voided on 

these parts.

  •  Cover the drain to avoid losing parts.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare 

parts with package contents list and hardware contents. If any part is missing or 

damaged, do not attempt to assemble the product.  

Contact customer service for replacement parts. 
Estimated Assembly Time: 60 minutes
Tools Required for Assembly (not included): Adjustable Wrench, thread sealant 

tape, Silicone

Installations may vary depending on how the previous faucet was  

installed. Supplies necessary for the installation of the faucet are not  

all included; however, they are available wherever plumbing supplies  

are sold.
Prior to beginning installation, turn off the hot and cold water lines, then turn 

on the old faucet to release built-up pressure. When installing the new faucet, 

hand tighten the connector nuts. 

DO NOT OVERTIGHTEN. Connections 

that are too tight will reduce the integrity of the system.

Need Help? Please call our toll-free line at (877) 319-3757 (8 am to 5 pm CST) for additional assistance or service.

Homewerks Worldwide, LLC • Lake Bluff, IL 60044 • www.homewerksww.com

Содержание 73-BRT2-J









Отзывы: