03/23/05 J600CHT Assembly – DRAFT Prepared for Jacto
Service Seminar 3/2005
DRAFT COPY
J600 CHT Assembly
1)
Remove the sprayer and components from the crate it was shipped in. In the crate
you will find the following components to assemble: main outlet duct, stationary
duct, control valve, vertical hydraulic cylinder and brackets, clean water tank and
bracket, side step, auxiliary ducts and JA nozzles, fan cage cover for disconnect, and
accessory box with the required fasteners to assembly the sprayer.
Accessory Box
The above picture shows the parts that you will find inside the accessory box. The
hardware will be used in the assembly of the sprayer. You will also notice that there
is 2 vertical cylinder brackets, pivot bushings for duct, pin for vertical cylinder, fan
disconnect cover, plate for attaching the fresh water tank bracket, 6 JA nozzles with
swirl cores, hose retaining clip, spanner wrench, and pins for your convenience when
attaching the sprayer to the tractor. You will also find the operator’s manual.
