background image

24

IMPORTANT INFORMATION TO THE USER

Before using the JACTO HIGH PRESSURE

CLEANING MACHINES MODEL 8000, read carefully and
follow strictly the instructions given herein.

You must maintain all the decals in the right place and

replace any of them if illegible.

Avoid accidents by working carefully.

ATTENTION: THIS MACHINE IS NOT A TOY. THEREFORE DO NOT

ALLOW CHILDREN OR UNTRAINED PEOPLE TO USE THIS MACHINE.

ON THE INSTALLATION

- Before installing the machine, make sure the local power supply circuit

is compatible with the machine voltage and frequency. On no account eliminate

the ground prong of the plug.

- Connect the plug only to properly grounded sockets.

- Never touch the socket or plug with wet hands.

- Check the electric cable before using the machine. If it is damaged,

replace it.

- The following may occur in locations of great voltage fluctuation:

1- The motor does not start.

2- The motor will be switched off during use.

In both cases, it is recommended to wait some minutes before

starting the motor again. If the problem persists, please call your dealer.

NOTE: The machine has a device that switchs off the motor automatically

 in case of  current overcharge.

05

STATEMENT OF LIMITED WARRANTY

WARRANTY EXCLUSIONS:

- Defects resulting from accidents;

- Lubricating oil;

- Parts showing normal wear due to use, UNLESS THEY SHOW DEFECTS IN

WORKMANSHIP, ASSEMBLY OR MATERIAL;

- Damages of personal or material nature to the use, owner or third parties;

- Transport and mobilization of people and vehicles;

- Transport and freight of equipment, parts and components in connection with warranty

claims not granted.

GENERAL INFORMATION:

- The replacement of parts within the warranty period shall not extend nor restart the

warranty period set forth hereinabove;

- Eventual delays in performing services shall not grant the owner the right to indemnity or

extension of the warranty period set forth hereinabove;

- Jacto reserves the right to change its products or to interrupt the manufacture of  this

equipment without prior notice;

- Should have any further question, please consult your dealer.

MÁQUINAS  AGRÍCOLAS  JACTO  S.A. - JACTO CLEANING

Содержание 8000















Отзывы: